mirror of
https://github.com/NeoCloud/NeoNetwork
synced 2024-12-23 17:39:24 +08:00
1.1 KiB
1.1 KiB
NeoNetwork Recommended Setup:
Part 0: Routing Protocols
- BGP for EGP, the use of MP-BGP is encouraged
- OSPF for IGP, there's not much reason to use anything else these days, especially with pure software-based solution
Part 1: Intra-AS (within your own AS) WireGuard configs
- Use IPv4 Link-Local addresses in point-to-point tunnels (such that all internal routing is determined by your IGP of choice)
- Only IPv6 loopback address is required to run OSPFv3
- Actual IPv4/IPv6 address for a node should be on a loopback interface
- Remember to set src addr to node addresses
Part 2: Inter-AS (tunnels interfacing with other AS) WireGuard configs
- Use Link-Local or Point-to-Point addresses, depending on your (or your peer's) taste
- Older versions (before 8.5.1) of FRRouting have problems interfacing with BIRD when using Link-Local addresses, choose Point-to-Point in this case
- Point-to-Point setup requires less config in FRRouting
Part -1: (Un)Common Pitfalls
- DO NOT RUN IGP ON AN INTERFACE THAT MIGHT CONTAIN PUBLIC IP (This kickstarts route flapping, use MACVLAN to avoid it)