mirror of
https://github.com/NeoCloud/NeoNetwork
synced 2024-12-23 20:19:24 +08:00
24 lines
1.1 KiB
Markdown
24 lines
1.1 KiB
Markdown
|
# NeoNetwork Recommended Setup:
|
||
|
|
|
||
|
|
### Part 0: Routing Protocols
|
||
|
|
|
||
|
|
* BGP for EGP, the use of MP-BGP is encouraged
|
||
|
|
* OSPF for IGP, there's not much reason to use anything else these days, especially with pure software-based solution
|
||
|
|
|
||
|
|
### Part 1: Intra-AS (within your own AS) WireGuard configs
|
||
|
|
|
||
|
|
* Use IPv4 Link-Local addresses in point-to-point tunnels (such that all internal routing is determined by your IGP of choice)
|
||
|
|
* Only IPv6 loopback address is required to run OSPFv3
|
||
|
|
* Actual IPv4/IPv6 address for a node should be on a loopback interface
|
||
|
|
* Remember to set src addr to node addresses
|
||
|
|
|
||
|
|
### Part 2: Inter-AS (tunnels interfacing with other AS) WireGuard configs
|
||
|
|
|
||
|
|
* Use Link-Local or Point-to-Point addresses, depending on your (or your peer's) taste
|
||
|
|
* Older versions (before 8.5.1) of FRRouting have problems interfacing with BIRD when using Link-Local addresses, choose Point-to-Point in this case
|
||
|
|
* Point-to-Point setup requires less config in FRRouting
|
||
|
|
|
||
|
|
### Part -1: (Un)Common Pitfalls
|
||
|
|
|
||
|
|
* DO NOT RUN IGP ON AN INTERFACE THAT MIGHT CONTAIN PUBLIC IP (This kickstarts route flapping, use MACVLAN to avoid it)
|