ea_same() sometimes returns true for different route attributes,
which caused that hash table in BGP does not work correctly and
some routes were sent with different attributes.
Allows to add more interface patterns to one common 'options'
section like:
interface "eth3", "eth4" { options common to eth3 and eth4 };
Also removes undocumented and unnecessary ability to specify
more interface patterns with different 'options' sections:
interface "eth3" { options ... }, "eth4" { options ... };
Old AS path maching supposes thath AS number appears
only once in AS path, but that is not true. It also
contains some bugs related to AS path sets.
New code does not use any assumptions about semantic
structure of AS path. It is asymptotically slower than
the old code, but on real paths it is not significant.
It also allows '?' for matching one arbitrary AS number.
Cryptographic authentication in OSPF is defective by
design - there might be several packets independently
sent to the network (for example HELLO, LSUPD and LSACK)
where they might be reordered and that causes crypt.
sequence number error.
That can be workarounded by not incresing sequence number
too often. Now we update it only when last packet was sent
before at least one second. This can constitute a risk of
replay attacks, but RFC supposes something similar (like time
in seconds used as CSN).
Routes comming through pipe from primary to secondary table were
filtered by both EXPORT and IMPORT filters, but they should be
only filtered by EXPORT filters.
AS4 optional attribute errors were handled by session
drop (according to BGP RFC). This patch implements
error handling according to new BGP AS4 draft (*)
- ignoring invalid AS4 optional attributes.
(*) http://www.ietf.org/internet-drafts/draft-chen-rfc4893bis-02.txt
The core state machine was broken - it didn't free resources
in START -> DOWN transition and might freed resources after
UP -> STOP transition before protocol turned down. It leads
to deadlock on olock acquisition when lock was not freed
during previous stop.
The current behavior is that resources, allocated during
DOWN -> * transition, are freed in * -> DOWN transition,
and flushing (scheduled in UP -> *) just counteract
feeding (scheduled in * -> UP). Protocol fell down
when both flushing is done (if needed) and protocol
reports DOWN.
BTW, is thera a reason why neighbour cache item acquired
by protocol is not tracked by resource mechanism?
When protocol started, feeding was scheduled. If protocol
got down before feeding was executed, then function
responsible for connecting protocol to kernel routing
tables was called after the function responsible for
disconnecting, then resource pool of protocol was freed,
but freed linked list structures remains in the list.
values for MD5 password ID changed during reconfigure, Second
bug is that BIRD chooses password in first-fit manner, but RFC
says that it should use the one with the latest generate-from.
It also modifies the syntax for multiple passwords.
Now it is possible to just add more 'password' statements
to the interface section and it is not needed to use
'passwords' section. Old syntax can be used too.
- Old MED handling was completely different from behavior
specified in RFCs - for example they havn't been propagated
to neighboring areas.
- Update tie-breaking according to RFC 4271.
- Change default value for 'default bgp_med' configuration
option according to RFC 4271.
- metric is 3 byte long now
- summary lsa originating
- more OSPF areas possible
- virtual links
- better E1/E2 routes handling
- some bug fixes..
I have to do:
- md5 auth (last mandatory item from rfc2328)
- !!!!DEBUG!!!!! (mainly virtual link system has probably a lot of bugs)
- 2328 appendig E
neighbor->scope now contains proper address scope which is zero (SCOPE_HOST)
for local addresses, higher (SCOPE_LINK, ..., SCOPE_UNIVERSE) for remote ones.
o Use `expr' instead of `NUM' and `ipa' instead of `IPA',
so that defined symbols work everywhere.
o `define' now accepts both numbers and IP addresses.
o Renamed `ipa' in filters to `fipa'.
Pavel, please update filters to accept define'd symbols as well.
contains all attributes, not just the temporary ones. This avoids having
to merge the lists inside protocols or doing searches on both of them.
Also, do filtering of routes properly. (I'd like to avoid it, but it's
needed at least in the krt protocol.)
show the routing table as exported to the protocol given resp. as returned
from its import control hook.
To get handling of filtered extended attributes right (even in the old
`show route where <filter>' command), the get_route_info hook gets an
attribute list and all protocol specific rte attributes are contained
there as temporary ones. Updated RIP to do that.
Added ea_append() which joins two ea_list's.
Please try compiling your code with --enable-warnings to see them. (The
unused parameter warnings are usually bogus, the unused variable ones
are very useful, but gcc is unable to control them separately.)
Added real comparison of BGP routes (inspired by the Cisco one).
Default local preference and default MED are now settable.
Defined filter keywords for all BGP attributes we know.
of calling the protocols manually.
Implemented printing of dynamic attributes in `show route all'.
Each protocol can now register its own attribute class (protocol->attr_class,
set to EAP_xxx) and also a callback for naming and formatting of attributes.
The callback can return one of the following results:
GA_UNKNOWN Attribute not recognized.
GA_NAME Attribute name recognized and put to the buffer,
generic code should format the value.
GA_FULL Both attribute name and value put to the buffer.
Please update protocols generating dynamic attributes to provide
the attr_class and formatting hook.
in configuration files and commands for manipulating them.
Current debug message policy:
o D_STATES, D_ROUTES and D_FILTERS are handled in generic code.
o Other debug flags should be handled in the protocols and whenever
the flag is set, the corresponding messages should be printed
using calls to log(L_TRACE, ...), each message prefixed with
the name of the protocol instance. These messages should cover
the whole normal operation of the protocol and should be useful
for an administrator trying to understand what does the protocol
behave on his network or who is attempting to diagnose network
problems. If your messages don't fit to the categories I've defined,
feel free to add your own ones (by adding them to protocol.h
and on two places in nest/config.Y), but please try to keep the
categories as general as possible (i.e., not tied to your protocol).
o Internal debug messages not interesting even to an experienced
user should be printed by calling DBG() which is either void or
a call to debug() depending on setting of the LOCAL_DEBUG symbol
at the top of your source.
o Dump functions (proto->dump etc.) should call debug() to print
their messages.
o If you are doing any internal consistency checks, use ASSERT
or bug().
o Nobody shall ever call printf() or any other stdio functions.
Also please try to log any protocol errors you encounter and tag them
with the appropriate message category (usually L_REMOTE or L_AUTH). Always
carefully check contents of any message field you receive and verify all
IP addresses you work with (by calling ipa_classify() or by using the
neighbour cache if you want to check direct connectedness as well).
address, not per interface (hence it's ifa->flags & IA_UNNUMBERED) and
should be set reliably. IF_MULTIACCESS should be fixed now, but it isn't
wise to rely on it on interfaces configured with /30 prefix.
used for automatic generation of instance names.
protocol->name is the official name
protocol->template is the name template (usually "name%d"),
should be all lowercase.
Updated all protocols to define the templates, checked that their configuration
grammar includes proto_name which generates the name and interns it in the
symbol table.
with protocols wanting to use the same port on the same interface
during reconfiguration time.
How to use locks: In the if_notify hook, just order locks for the
interfaces you want to work with and do the real socket opening after the
lock hook function gets called. When you stop using the socket, close
it and rfree() the lock.
Please update your protocols to use the new locking mechanism.
of that EA in the same list and causes ea_find() to fail unless you add
EA_ALLOW_UNDEF to the second argument.
ea_sort (resp. ea_do_prune()) removes all undef'd attributes from the list.
I hope this works :)
To define a new command, just add a new rule to the gramar:
CF_CLI(COMMAND NAME, arguments, help-args, help-text) {
what-should-the-command-do
} ;
where <arguments> are appended to the RHS of the rule, <help-args> is the
argument list as shown in the help and <help-text> is description of the
command for the help.
<what-should-the-command-do> is a C code snippet to be executed. It should
not take too much time to execute. If you want to print out a lot of
information, you can schedule a routine to be called after the current
buffer is flushed by making cli->cont point to the routine (see the
TEST LONG command definition for an example); if the connection is closed
in the meantime, cli->cleanup gets called.
You can access `struct cli' belonging to the connection you're currently
servicing as this_cli, but only during parse time, not from routines scheduled
for deferred execution.
Functions to call inside command handlers:
cli_printf(cli, code, printf-args) -- print text to CLI connection,
<code> is message code as assigned in doc/reply_codes or a negative
one if it's a continuation line.
cli_msg(code, printf-args) -- the same for this_cli.
Use 'sock -x bird.ctl' for connecting to the CLI until a client is written.
we want to allow filter and similar complex constructs to be used in commands
and we should avoid code duplication), only with CLI_MARKER token prepended
before the whole input.
Defined macro CF_CLI(cmd, args, help) for defining CLI commands in .Y files.
The first argument specifies the command itself, the remaining two arguments
are copied to the help file (er, will be copied after the help file starts
to exist). This macro automatically creates a skeleton rule for the command,
you only need to append arguments as in:
CF_CLI(STEAL MONEY, <$>, [[Steal <$> US dollars or equivalent in any other currency]]): NUM {
cli_msg(0, "%d$ stolen", $3);
} ;
Also don't forget to reset lexer state between inputs.
but the core routines are there and seem to be working.
o lib/ipv6.[ch] written
o Lexical analyser recognizes IPv6 addresses and when in IPv6
mode, treats pure IPv4 addresses as router IDs.
o Router ID must be configured manually on IPv6 systems.
o Added SCOPE_ORGANIZATION for org-scoped IPv6 multicasts.
o Fixed few places where ipa_(hton|ntoh) was called as a function
returning converted address.
The changes are just too extensive for lazy me to list them
there, but see the comment at the top of sysdep/unix/krt.c.
The code got a bit more ifdeffy than I'd like, though.
Also fixed a bunch of FIXME's and added a couple of others. :)
