Ondrej Zajicek
b21f68b4cd
Fix bugs in OSPF MD5 authentication. First bug is that default
...
values for MD5 password ID changed during reconfigure, Second
bug is that BIRD chooses password in first-fit manner, but RFC
says that it should use the one with the latest generate-from.
It also modifies the syntax for multiple passwords.
Now it is possible to just add more 'password' statements
to the interface section and it is not needed to use
'passwords' section. Old syntax can be used too.
2008-11-08 17:24:23 +01:00
Ondrej Zajicek
fd91ae3325
Fix problem with local time changes.
2008-11-05 22:36:49 +01:00
Ondrej Filip
8ffc753441
Minor changes to keep gcc happy.
2005-02-15 06:32:31 +00:00
Ondrej Filip
c6dce04bed
Bugfix.
2004-09-08 16:04:02 +00:00
Ondrej Filip
004cf4fc0c
Minor bugfix to compile bird in IPv6.
2004-07-15 17:28:13 +00:00
Ondrej Filip
16c2d48d8f
Bugfix - RIP now updates routes with worse metric.
2004-07-13 20:53:56 +00:00
Ondrej Filip
5236fb03af
Password management redesigned (untested).
2004-06-26 20:11:14 +00:00
Ondrej Filip
5ed68e46d7
Small typo changes.
2004-06-23 23:59:48 +00:00
Ondrej Filip
973cf09c3b
Hotfix to problem with metric change reported by Luca.
2004-06-23 21:36:55 +00:00
Ondrej Filip
3fe5f89907
P->magic used just in LOCAL_DEBUG mode
2004-06-23 21:34:26 +00:00
Martin Mares
c91fc9b606
... and in rip (there are even unused functions!).
2004-06-05 09:27:49 +00:00
Martin Mares
6a57bb3110
Killed a couple of unused variables.
...
We really should compile with warnings enabled.
2004-05-31 20:57:38 +00:00
Martin Mares
0757bcb728
One space more.
2004-05-31 20:35:19 +00:00
Martin Mares
3cb96cd343
The initial sequence number for RIP md5 authentication was always zero.
...
Bad as when bird e.g. was running for two weeks and then restarted it
would take another two weeks until the peers of this router would accept
data again from this router, as the sequence number would be too low.
Changed to use the the current system time as the starting sequence
number which is a more sane start value.
(by Andreas, cleaned up by me)
2004-05-31 18:11:16 +00:00
Martin Mares
4a02013767
Make RIP nolisten mode actually work. The socket is required for
...
sending, the received data has to be discarded instead.
(patch by Andreas Steinmetz modified by me)
2004-05-31 17:42:38 +00:00
Martin Mares
502ded5215
Fix reporting of RIP socket errors. Thanks to Eric Leblond for the patch.
2003-12-06 16:41:11 +00:00
Martin Mares
8cf76fa853
Bug fixes to authentication code by Eric Leblond <eleblond@init-sys.com>.
2003-04-06 18:38:01 +00:00
Pavel Machek
19bd5c8e2c
Password does not need to be null-terminated, do not print garbage in
...
such case. Thanks to silvio@big.net .
2002-09-21 13:57:48 +00:00
Martin Mares
53a50af504
Applied Pavel's fix for broadcast/multicast mode.
2002-03-10 12:32:12 +00:00
Pavel Machek
ad3907559c
RIP bugfix
2000-06-21 19:40:46 +00:00
Pavel Machek
07f29765a5
RIPv6 now works.
2000-06-07 14:06:37 +00:00
Pavel Machek
18b4d6bf27
rip ipv6 bugfix
2000-06-07 13:58:49 +00:00
Martin Mares
58f7d004fd
Fixes to the progdoc.
2000-06-07 13:25:53 +00:00
Martin Mares
2e9b24211a
Spelling fixes to progdoc.
2000-06-07 12:29:08 +00:00
Pavel Machek
4c5f93d76b
Better documentation. There are functions whose description is good when
...
reading source but whose documentation does not belong to progdocs.
2000-06-05 17:13:36 +00:00
Pavel Machek
8798c81176
Docs updates:
...
make prog.dvi
do not overflow in .dvi
include filter documentation in the system
2000-06-05 16:36:16 +00:00
Pavel Machek
8b79c4ccd5
Add safety check.
2000-06-05 15:41:44 +00:00
Pavel Machek
b093c328f5
Updates to both programmers and users doc
2000-06-05 12:52:57 +00:00
Martin Mares
e24ddd9bef
Don't set precedence and TTL for the dummy socket.
2000-06-04 20:00:35 +00:00
Martin Mares
df49d4e14b
Removed lots of trailing newlines in log messages.
...
Please note that the only calls which don't add newlines automatically
(i.e., don't print a full line of output) are debug() and DBG().
2000-06-04 19:56:06 +00:00
Martin Mares
201187c558
debug -> DBG
2000-06-04 19:55:11 +00:00
Martin Mares
491cd43b77
Updated RIP to new neighbor cache semantics. When presented with next hop
...
equal to a local address, just ignore the route (as it is usually just an
external route exported by us echoed by some RIP peer), when given an
invalid next hop, moan to the log.
2000-06-01 12:59:50 +00:00
Martin Mares
fcb5f4a725
Updated all the Doc files to new format.
2000-05-31 11:30:18 +00:00
Martin Mares
3b0b2cb61f
IPv6: Absolutize link-scope addresses of incoming packets.
...
IPv6 socket interface is hopefully right now.
2000-05-30 22:48:14 +00:00
Martin Mares
2cec475b8f
Removed several unused local variables.
2000-05-30 21:24:53 +00:00
Pavel Machek
f3b33928ce
Tried to change garbagetime -> garbage time to be more consistent.
2000-05-30 11:15:19 +00:00
Martin Mares
dc6405d27e
Latest changes by Pavel have removed the error messages printed after
...
unsuccessful socket open, but replaced them by segmentatio fault!
Grrrrrrrrr.
2000-05-19 17:21:42 +00:00
Pavel Machek
9511a483b1
Less error messages in case sk_open fails.
2000-05-19 16:44:25 +00:00
Pavel Machek
eb4097e4e4
Added name of protocol to messages being logged.
2000-05-19 16:22:53 +00:00
Martin Mares
f7ad556f20
Commented out the `inserting entry which is already there' message since
...
it's pretty normal: during feeding of the protocol, a new route can appear
which will be announced normally and then repeated by the feeding process.
2000-05-19 11:00:47 +00:00
Pavel Machek
6d5e703dc9
Minor cleaning
2000-05-17 20:23:05 +00:00
Martin Mares
e5a47266d0
Turned off LOCAL_DEBUG.
2000-05-16 15:08:52 +00:00
Pavel Machek
5b846de6a6
Interface dummy is too strange for me... but psst, that's secret.
2000-05-16 15:05:05 +00:00
Pavel Machek
898fdd85dc
Rip should now reconfigure itself only if needed.
2000-05-16 14:58:06 +00:00
Martin Mares
28323d9ddb
Several minor RIP changes (Pavel, please check as usually):
...
o Use FIB_ITERATE_INIT instead of calling the function fit_init()
which is explictly marked as private in route.h.
o When printing trace messages, don't spit out protocol name twice.
o Some messages are a bit more verbose.
o Added a bunch of FIXME's.
o When running in broadcast mode, don't forget to bind the local
end of the socket to the same broadcast address, so that we don't
get the broadcasts looped back via different interface. I'm just
going to look up the same problem for multicasts.
2000-05-11 15:05:13 +00:00
Pavel Machek
ec21aecfdd
Fixed nasty segfault in rip.
2000-05-11 10:33:18 +00:00
Pavel Machek
10f5c47d2e
Some more paranoia into rip_insert and rip_delete
2000-05-11 09:41:16 +00:00
Pavel Machek
94d1a6c9dc
Unused variable killed.
2000-05-11 09:36:55 +00:00
Pavel Machek
2a41c8d9fc
use password_same utility function
2000-05-10 13:42:50 +00:00
Pavel Machek
3e47419274
Inlined metric and mode into struct rip_interface to make reconfig
...
work.
reconfigure is conservative but should work.
2000-05-10 13:23:21 +00:00
Pavel Machek
30aa02d70d
rip_reconfigure done right
2000-05-10 13:05:39 +00:00
Pavel Machek
b8524e9be4
ipa_same does not exist.
2000-05-10 12:48:06 +00:00
Pavel Machek
0bff946c0a
Nicer messages from rip.
2000-05-10 12:46:47 +00:00
Pavel Machek
6f3849774f
Use ea_get_int instead of ea_find.
2000-05-10 12:38:05 +00:00
Pavel Machek
7f5f44bb92
Reconfigure hook copied from bgp.
2000-05-10 12:32:45 +00:00
Pavel Machek
84a1305437
Send first udpate sooner.
2000-05-10 12:26:09 +00:00
Pavel Machek
14758d87c4
Only announce change to main routing table if it is better than current.
2000-05-10 12:23:06 +00:00
Pavel Machek
5e50f0a028
Don't touch used memory.
2000-05-10 11:57:56 +00:00
Pavel Machek
be3b6dc574
Killed unused variable.
2000-05-10 11:48:34 +00:00
Pavel Machek
d9f89e0114
You can now say "mode multicast".
2000-05-10 11:40:30 +00:00
Pavel Machek
4bfe4e8551
Fix segfaults by using new ea_get_int.
2000-05-10 06:56:42 +00:00
Martin Mares
92ef4fa719
Preference is a configurable parameter.
2000-05-08 10:38:25 +00:00
Martin Mares
ce1da96ee7
Added commands show route protocol <p>' and
show route import <p>' which
...
show the routing table as exported to the protocol given resp. as returned
from its import control hook.
To get handling of filtered extended attributes right (even in the old
`show route where <filter>' command), the get_route_info hook gets an
attribute list and all protocol specific rte attributes are contained
there as temporary ones. Updated RIP to do that.
Added ea_append() which joins two ea_list's.
2000-05-06 22:57:39 +00:00
Martin Mares
ab1129c1bd
Added skeleton Doc files for the whole developer's documentation.
2000-05-05 17:17:42 +00:00
Martin Mares
9a220cabbc
#ifdef out lots of debugging information.
...
The long resource/routing table dump printed upon startup is gone now
and if you wish to see it, just send bird SIGUSR1 or use the `debug'
commands.
2000-05-04 20:52:28 +00:00
Pavel Machek
9b63e3a58a
Spelling fixes.
2000-05-04 20:08:34 +00:00
Martin Mares
53943a0022
Defined format specifier %M' which behaves as
%m', but takes the
...
error code as an argument.
Use it in socket hooks where we really shouldn't rely on errno containing
the right value or even existing.
2000-05-02 16:10:04 +00:00
Pavel Machek
2337ade754
Moved documentation to top of file, where it belongs.
2000-04-30 18:47:48 +00:00
Pavel Machek
9c1a55deee
IpV6 now actually compiles.
...
Mj, could you provide example of static config for ipv6 that is _not_
rejected by checks? I tried this and got rejected.
route 62:168::/32 via 62:169::;
route 1:2::/32 via 1:3::;
2000-04-29 15:45:30 +00:00
Martin Mares
2edb31b097
Split CF_HDR section to CF_HDR (only includes) and CF_DEFINES (defines,
...
C declarations etc.).
2000-04-28 15:11:10 +00:00
Pavel Machek
decc99fbbd
Killed fixme: I already fixed it.
2000-04-28 10:15:57 +00:00
Pavel Machek
a769a180d7
Provide rip_get_attr, how do I test it?
2000-04-28 10:14:59 +00:00
Pavel Machek
6c0a7174af
Add sample documentation to rip.
2000-04-28 09:55:52 +00:00
Pavel Machek
c010f4cb37
Use right address for ripv6.
2000-04-26 11:33:03 +00:00
Pavel Machek
7f704c06d8
Cleanup in preparation for ipv6.
2000-04-26 11:07:57 +00:00
Pavel Machek
ac7a2145cc
f_new_dynamic_attr gets third argument, type as filters know it.
2000-04-12 14:02:04 +00:00
Pavel Machek
3d0ea3a7c3
Fix of comment.
2000-04-07 09:02:17 +00:00
Martin Mares
dad177d7e0
RIP: Set attribute class.
2000-04-01 10:20:12 +00:00
Martin Mares
ac4b4683ae
Removal of useless includes continues...
2000-03-31 23:40:00 +00:00
Martin Mares
a37410cbdd
Use bsprintf() instead of sprintf().
2000-03-31 23:33:03 +00:00
Martin Mares
221135d6bf
Include "lib/string.h" instead of <string.h>. It should give us bzero()
...
and other non-portable functions on all systems.
2000-03-31 23:30:21 +00:00
Pavel Machek
8d2e3eba92
Cross-protocol issues solved better
2000-03-29 08:58:06 +00:00
Pavel Machek
d0031c5ee9
Use neigh_connected_to in rip, and behave more correctly
...
w.r.t. whotoldme and nexthop.
2000-03-27 12:21:11 +00:00
Pavel Machek
6480dd0880
I broke compilation. Sorry.
2000-03-26 21:31:57 +00:00
Pavel Machek
8c86f96fa6
Split horizont done right.
...
Locks done better.
2000-03-26 18:01:27 +00:00
Pavel Machek
9ee07ca53f
FIXME was actually already resolved
2000-03-24 10:08:20 +00:00
Pavel Machek
772f489932
Minor change to make code more readable.
2000-03-23 12:08:40 +00:00
Pavel Machek
ff8ed63285
Rip now tries to lock interface.
...
Fixed fatal errors which caused segfault at startup.
Fixed fatal errors in rip which caused it not to send more than first
update.
2000-03-22 14:26:03 +00:00
Pavel Machek
856b87d1e4
Cleanup, mostly debugging messages.
2000-03-13 13:31:00 +00:00
Pavel Machek
af834f8630
Categorized TRACE() messages in rip
2000-03-09 16:38:51 +00:00
Pavel Machek
cb822c0777
Rip tracing: still need config hunk to set p->debug.
2000-03-09 15:12:41 +00:00
Pavel Machek
38466dbdac
log() classes done right
2000-03-09 14:59:10 +00:00
Martin Mares
9f4929e749
Renamed EAF_INLINE to EAF_TEMP to make the name reflect the real meaning.
2000-03-04 22:30:44 +00:00
Pavel Machek
62ab789de5
Added type parameter to f_new_dynamic_attr.
2000-03-01 14:42:59 +00:00
Martin Mares
db1326aa5e
Dynamic attributes are now declared in per-protocol grammar files instead
...
of filter/config.Y. Bird now compiles even if you disable RIP.
Removed RTA and IMPOSSIBLE tokens (unused).
Removed superfluous comment in filter.h.
I've tried to do my best, but Pavel, please check these changes.
2000-03-01 11:32:23 +00:00
Martin Mares
ef0883a12f
Adapted RIP to new interface flags. Pavel, please verify it's right.
2000-02-29 23:20:55 +00:00
Pavel Machek
bd215f8bab
Do not send empty packets in rip.
2000-01-26 14:12:18 +00:00
Pavel Machek
8660913ba8
Output made prettier.
2000-01-26 12:07:18 +00:00
Martin Mares
d272fe22dd
Separated `official protocol names' used in status dumps from name templates
...
used for automatic generation of instance names.
protocol->name is the official name
protocol->template is the name template (usually "name%d"),
should be all lowercase.
Updated all protocols to define the templates, checked that their configuration
grammar includes proto_name which generates the name and interns it in the
symbol table.
2000-01-17 11:52:50 +00:00
Martin Mares
3f996d46df
Added missing semicolon.
...
rip.h compiles in IPv6 mode, rip.c still doesn't.
1999-12-16 13:14:32 +00:00