Jerry/D-Modem
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
D-Modem/pjproject-2.11.1/third_party/srtp/include/srtp.h

1788 lines
68 KiB
C
Raw Normal View History

initial commit
2021-10-30 02:41:03 +08:00
/*
* srtp.h
*
* interface to libsrtp
*
* David A. McGrew
* Cisco Systems, Inc.
*/
/*
*
* Copyright (c) 2001-2017, Cisco Systems, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*
* Neither the name of the Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef SRTP_SRTP_H
#define SRTP_SRTP_H
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @defgroup SRTP Secure RTP
*
* @brief libSRTP provides functions for protecting RTP and RTCP. See
* Section @ref Overview for an introduction to the use of the library.
*
* @{
*/
/*
* SRTP_MASTER_KEY_LEN is the nominal master key length supported by libSRTP
*/
#define SRTP_MASTER_KEY_LEN 30
/*
* SRTP_MAX_KEY_LEN is the maximum key length supported by libSRTP
*/
#define SRTP_MAX_KEY_LEN 64
/*
* SRTP_MAX_TAG_LEN is the maximum tag length supported by libSRTP
*/
#define SRTP_MAX_TAG_LEN 16
/**
* SRTP_MAX_MKI_LEN is the maximum size the MKI could be which is
* 128 bytes
*/
#define SRTP_MAX_MKI_LEN 128
/**
* SRTP_MAX_TRAILER_LEN is the maximum length of the SRTP trailer
* (authentication tag and MKI) supported by libSRTP. This value is
* the maixmum number of octets that will be added to an RTP packet by
* srtp_protect().
*
* @brief the maximum number of octets added by srtp_protect().
*/
#define SRTP_MAX_TRAILER_LEN (SRTP_MAX_TAG_LEN + SRTP_MAX_MKI_LEN)
/**
* SRTP_MAX_NUM_MASTER_KEYS is the maximum number of Master keys for
* MKI supported by libSRTP.
*
*/
#define SRTP_MAX_NUM_MASTER_KEYS 16
#define SRTP_SALT_LEN 14
/*
* SRTP_AEAD_SALT_LEN is the length of the SALT values used with
* GCM mode. GCM mode requires an IV. The SALT value is used
* as part of the IV formation logic applied to each RTP packet.
*/
#define SRTP_AEAD_SALT_LEN 12
#define SRTP_AES_128_KEY_LEN 16
#define SRTP_AES_192_KEY_LEN 24
#define SRTP_AES_256_KEY_LEN 32
#define SRTP_AES_ICM_128_KEY_LEN_WSALT (SRTP_SALT_LEN + SRTP_AES_128_KEY_LEN)
#define SRTP_AES_ICM_192_KEY_LEN_WSALT (SRTP_SALT_LEN + SRTP_AES_192_KEY_LEN)
#define SRTP_AES_ICM_256_KEY_LEN_WSALT (SRTP_SALT_LEN + SRTP_AES_256_KEY_LEN)
#define SRTP_AES_GCM_128_KEY_LEN_WSALT (SRTP_AEAD_SALT_LEN + SRTP_AES_128_KEY_LEN)
#define SRTP_AES_GCM_192_KEY_LEN_WSALT (SRTP_AEAD_SALT_LEN + SRTP_AES_192_KEY_LEN)
#define SRTP_AES_GCM_256_KEY_LEN_WSALT (SRTP_AEAD_SALT_LEN + SRTP_AES_256_KEY_LEN)
/**
* @brief A srtp_cipher_type_id_t is an identifier for a particular cipher
* type.
*
* A srtp_cipher_type_id_t is an integer that represents a particular
* cipher type, e.g. the Advanced Encryption Standard (AES). A
* SRTP_NULL_CIPHER is avaliable; this cipher leaves the data unchanged,
* and can be selected to indicate that no encryption is to take
* place.
*
* @ingroup Ciphers
*/
typedef uint32_t srtp_cipher_type_id_t;
/**
* @brief An srtp_auth_type_id_t is an identifier for a particular authentication
* function.
*
* An srtp_auth_type_id_t is an integer that represents a particular
* authentication function type, e.g. HMAC-SHA1. A SRTP_NULL_AUTH is
* avaliable; this authentication function performs no computation,
* and can be selected to indicate that no authentication is to take
* place.
*
* @ingroup Authentication
*/
typedef uint32_t srtp_auth_type_id_t;
/**
* @brief srtp_err_status_t defines error codes.
*
* The enumeration srtp_err_status_t defines error codes. Note that the
* value of srtp_err_status_ok is equal to zero, which can simplify error
* checking somewhat.
*
*/
typedef enum {
srtp_err_status_ok = 0, /**< nothing to report */
srtp_err_status_fail = 1, /**< unspecified failure */
srtp_err_status_bad_param = 2, /**< unsupported parameter */
srtp_err_status_alloc_fail = 3, /**< couldn't allocate memory */
srtp_err_status_dealloc_fail = 4, /**< couldn't deallocate properly */
srtp_err_status_init_fail = 5, /**< couldn't initialize */
srtp_err_status_terminus = 6, /**< can't process as much data as requested */
srtp_err_status_auth_fail = 7, /**< authentication failure */
srtp_err_status_cipher_fail = 8, /**< cipher failure */
srtp_err_status_replay_fail = 9, /**< replay check failed (bad index) */
srtp_err_status_replay_old = 10, /**< replay check failed (index too old) */
srtp_err_status_algo_fail = 11, /**< algorithm failed test routine */
srtp_err_status_no_such_op = 12, /**< unsupported operation */
srtp_err_status_no_ctx = 13, /**< no appropriate context found */
srtp_err_status_cant_check = 14, /**< unable to perform desired validation */
srtp_err_status_key_expired = 15, /**< can't use key any more */
srtp_err_status_socket_err = 16, /**< error in use of socket */
srtp_err_status_signal_err = 17, /**< error in use POSIX signals */
srtp_err_status_nonce_bad = 18, /**< nonce check failed */
srtp_err_status_read_fail = 19, /**< couldn't read data */
srtp_err_status_write_fail = 20, /**< couldn't write data */
srtp_err_status_parse_err = 21, /**< error parsing data */
srtp_err_status_encode_err = 22, /**< error encoding data */
srtp_err_status_semaphore_err = 23,/**< error while using semaphores */
srtp_err_status_pfkey_err = 24, /**< error while using pfkey */
srtp_err_status_bad_mki = 25, /**< error MKI present in packet is invalid */
srtp_err_status_pkt_idx_old = 26, /**< packet index is too old to consider */
srtp_err_status_pkt_idx_adv = 27 /**< packet index advanced, reset needed */
} srtp_err_status_t;
typedef struct srtp_ctx_t_ srtp_ctx_t;
/**
* @brief srtp_sec_serv_t describes a set of security services.
*
* A srtp_sec_serv_t enumeration is used to describe the particular
* security services that will be applied by a particular crypto
* policy (or other mechanism).
*/
typedef enum {
sec_serv_none = 0, /**< no services */
sec_serv_conf = 1, /**< confidentiality */
sec_serv_auth = 2, /**< authentication */
sec_serv_conf_and_auth = 3 /**< confidentiality and authentication */
} srtp_sec_serv_t;
/**
* @brief srtp_crypto_policy_t describes a particular crypto policy that
* can be applied to an SRTP stream.
*
* A srtp_crypto_policy_t describes a particular cryptographic policy that
* can be applied to an SRTP or SRTCP stream. An SRTP session policy
* consists of a list of these policies, one for each SRTP stream
* in the session.
*/
typedef struct srtp_crypto_policy_t {
srtp_cipher_type_id_t cipher_type; /**< An integer representing
* the type of cipher. */
int cipher_key_len; /**< The length of the cipher key
* in octets. */
srtp_auth_type_id_t auth_type; /**< An integer representing the
* authentication function. */
int auth_key_len; /**< The length of the authentication
* function key in octets. */
int auth_tag_len; /**< The length of the authentication
* tag in octets. */
srtp_sec_serv_t sec_serv; /**< The flag indicating the security
* services to be applied. */
} srtp_crypto_policy_t;
/**
* @brief srtp_ssrc_type_t describes the type of an SSRC.
*
* An srtp_ssrc_type_t enumeration is used to indicate a type of SSRC. See
* @ref srtp_policy_t for more informataion.
*/
typedef enum {
ssrc_undefined = 0, /**< Indicates an undefined SSRC type. */
ssrc_specific = 1, /**< Indicates a specific SSRC value */
ssrc_any_inbound = 2, /**< Indicates any inbound SSRC value
(i.e. a value that is used in the
function srtp_unprotect()) */
ssrc_any_outbound = 3 /**< Indicates any outbound SSRC value
(i.e. a value that is used in the
function srtp_protect()) */
} srtp_ssrc_type_t;
/**
* @brief An srtp_ssrc_t represents a particular SSRC value, or a `wildcard' SSRC.
*
* An srtp_ssrc_t represents a particular SSRC value (if its type is
* ssrc_specific), or a wildcard SSRC value that will match all
* outbound SSRCs (if its type is ssrc_any_outbound) or all inbound
* SSRCs (if its type is ssrc_any_inbound).
*
*/
typedef struct {
srtp_ssrc_type_t type; /**< The type of this particular SSRC */
unsigned int value; /**< The value of this SSRC, if it is not a wildcard */
} srtp_ssrc_t;
/**
* @brief points to an EKT policy
*/
typedef struct srtp_ekt_policy_ctx_t *srtp_ekt_policy_t;
/**
* @brief points to EKT stream data
*/
typedef struct srtp_ekt_stream_ctx_t *srtp_ekt_stream_t;
/**
* @brief srtp_master_key_t represents a master key. There will
* be a Master Key Index and the Master Key associated with the
* Master Key Index. Need to also keep track of the Master Key
* Index Size to correctly read it from a packet.
*/
typedef struct srtp_master_key_t {
unsigned char *key;
unsigned char *mki_id;
unsigned int mki_size;
} srtp_master_key_t;
/**
* @brief represents the policy for an SRTP session.
*
* A single srtp_policy_t struct represents the policy for a single
* SRTP stream, and a linked list of these elements represents the
* policy for an entire SRTP session. Each element contains the SRTP
* and SRTCP crypto policies for that stream, a pointer to the SRTP
* master key for that stream, the SSRC describing that stream, or a
* flag indicating a `wildcard' SSRC value, and a `next' field that
* holds a pointer to the next element in the list of policy elements,
* or NULL if it is the last element.
*
* The wildcard value SSRC_ANY_INBOUND matches any SSRC from an
* inbound stream that for which there is no explicit SSRC entry in
* another policy element. Similarly, the value SSRC_ANY_OUTBOUND
* will matches any SSRC from an outbound stream that does not appear
* in another policy element. Note that wildcard SSRCs &b cannot be
* used to match both inbound and outbound traffic. This restriction
* is intentional, and it allows libSRTP to ensure that no security
* lapses result from accidental re-use of SSRC values during key
* sharing.
*
*
* @warning The final element of the list @b must have its `next' pointer
* set to NULL.
*/
typedef struct srtp_policy_t {
srtp_ssrc_t ssrc; /**< The SSRC value of stream, or the
* flags SSRC_ANY_INBOUND or
* SSRC_ANY_OUTBOUND if key sharing
* is used for this policy element.
*/
srtp_crypto_policy_t rtp; /**< SRTP crypto policy. */
srtp_crypto_policy_t rtcp; /**< SRTCP crypto policy. */
unsigned char *key; /**< Pointer to the SRTP master key for
* this stream. */
srtp_master_key_t **keys; /** Array of Master Key structures */
unsigned long num_master_keys; /** Number of master keys */
srtp_ekt_policy_t ekt; /**< Pointer to the EKT policy structure
* for this stream (if any) */
unsigned long window_size; /**< The window size to use for replay
* protection. */
int allow_repeat_tx; /**< Whether retransmissions of
* packets with the same sequence number
* are allowed. (Note that such repeated
* transmissions must have the same RTP
* payload, or a severe security weakness
* is introduced!) */
int *enc_xtn_hdr; /**< List of header ids to encrypt. */
int enc_xtn_hdr_count; /**< Number of entries in list of header ids. */
struct srtp_policy_t *next; /**< Pointer to next stream policy. */
} srtp_policy_t;
/**
* @brief An srtp_t points to an SRTP session structure.
*
* The typedef srtp_t is a pointer to a structure that represents
* an SRTP session. This datatype is intentially opaque in
* order to separate the interface from the implementation.
*
* An SRTP session consists of all of the traffic sent to the RTP and
* RTCP destination transport addresses, using the RTP/SAVP (Secure
* Audio/Video Profile). A session can be viewed as a set of SRTP
* streams, each of which originates with a different participant.
*/
typedef srtp_ctx_t *srtp_t;
/**
* @brief srtp_init() initializes the srtp library.
*
* @warning This function @b must be called before any other srtp
* functions.
*/
srtp_err_status_t srtp_init(void);
/**
* @brief srtp_shutdown() de-initializes the srtp library.
*
* @warning No srtp functions may be called after calling this function.
*/
srtp_err_status_t srtp_shutdown(void);
/**
* @brief srtp_protect() is the Secure RTP sender-side packet processing
* function.
*
* The function call srtp_protect(ctx, rtp_hdr, len_ptr) applies SRTP
* protection to the RTP packet rtp_hdr (which has length *len_ptr) using
* the SRTP context ctx. If srtp_err_status_ok is returned, then rtp_hdr
* points to the resulting SRTP packet and *len_ptr is the number of
* octets in that packet; otherwise, no assumptions should be made
* about the value of either data elements.
*
* The sequence numbers of the RTP packets presented to this function
* need not be consecutive, but they @b must be out of order by less
* than 2^15 = 32,768 packets.
*
* @warning This function assumes that it can write the authentication
* tag into the location in memory immediately following the RTP
* packet, and assumes that the RTP packet is aligned on a 32-bit
* boundary.
*
* @warning This function assumes that it can write SRTP_MAX_TRAILER_LEN
* into the location in memory immediately following the RTP packet.
* Callers MUST ensure that this much writable memory is available in
* the buffer that holds the RTP packet.
*
* @param ctx is the SRTP context to use in processing the packet.
*
* @param rtp_hdr is a pointer to the RTP packet (before the call); after
* the function returns, it points to the srtp packet.
*
* @param len_ptr is a pointer to the length in octets of the complete
* RTP packet (header and body) before the function call, and of the
* complete SRTP packet after the call, if srtp_err_status_ok was returned.
* Otherwise, the value of the data to which it points is undefined.
*
* @return
* - srtp_err_status_ok no problems
* - srtp_err_status_replay_fail rtp sequence number was non-increasing
* - @e other failure in cryptographic mechanisms
*/
srtp_err_status_t srtp_protect(srtp_t ctx, void *rtp_hdr, int *len_ptr);
/**
* @brief srtp_protect_mki() is the Secure RTP sender-side packet processing
* function that can utilize MKI.
*
* The function call srtp_protect(ctx, rtp_hdr, len_ptr) applies SRTP
* protection to the RTP packet rtp_hdr (which has length *len_ptr) using
* the SRTP context ctx. If srtp_err_status_ok is returned, then rtp_hdr
* points to the resulting SRTP packet and *len_ptr is the number of
* octets in that packet; otherwise, no assumptions should be made
* about the value of either data elements.
*
* The sequence numbers of the RTP packets presented to this function
* need not be consecutive, but they @b must be out of order by less
* than 2^15 = 32,768 packets.
*
* @warning This function assumes that it can write the authentication
* tag into the location in memory immediately following the RTP
* packet, and assumes that the RTP packet is aligned on a 32-bit
* boundary.
*
* @warning This function assumes that it can write SRTP_MAX_TRAILER_LEN
* into the location in memory immediately following the RTP packet.
* Callers MUST ensure that this much writable memory is available in
* the buffer that holds the RTP packet.
*
* @param ctx is the SRTP context to use in processing the packet.
*
* @param rtp_hdr is a pointer to the RTP packet (before the call); after
* the function returns, it points to the srtp packet.
*
* @param pkt_octet_len is a pointer to the length in octets of the complete
* RTP packet (header and body) before the function call, and of the
* complete SRTP packet after the call, if srtp_err_status_ok was returned.
* Otherwise, the value of the data to which it points is undefined.
*
* @param use_mki is a boolean to tell the system if mki is being used. If
* set to false then will use the first set of session keys. If set to true will
* use the session keys identified by the mki_index
*
* @param mki_index integer value specifying which set of session keys should be
* used if use_mki is set to true.
*
* @return
* - srtp_err_status_ok no problems
* - srtp_err_status_replay_fail rtp sequence number was non-increasing
* - @e other failure in cryptographic mechanisms
*/
srtp_err_status_t srtp_protect_mki(srtp_ctx_t *ctx, void *rtp_hdr,
int *pkt_octet_len, unsigned int use_mki,
unsigned int mki_index);
/**
* @brief srtp_unprotect() is the Secure RTP receiver-side packet
* processing function.
*
* The function call srtp_unprotect(ctx, srtp_hdr, len_ptr) verifies
* the Secure RTP protection of the SRTP packet pointed to by srtp_hdr
* (which has length *len_ptr), using the SRTP context ctx. If
* srtp_err_status_ok is returned, then srtp_hdr points to the resulting
* RTP packet and *len_ptr is the number of octets in that packet;
* otherwise, no assumptions should be made about the value of either
* data elements.
*
* The sequence numbers of the RTP packets presented to this function
* need not be consecutive, but they @b must be out of order by less
* than 2^15 = 32,768 packets.
*
* @warning This function assumes that the SRTP packet is aligned on a
* 32-bit boundary.
*
* @param ctx is the SRTP session which applies to the particular packet.
*
* @param srtp_hdr is a pointer to the header of the SRTP packet
* (before the call). after the function returns, it points to the
* rtp packet if srtp_err_status_ok was returned; otherwise, the value of
* the data to which it points is undefined.
*
* @param len_ptr is a pointer to the length in octets of the complete
* srtp packet (header and body) before the function call, and of the
* complete rtp packet after the call, if srtp_err_status_ok was returned.
* Otherwise, the value of the data to which it points is undefined.
*
* @return
* - srtp_err_status_ok if the RTP packet is valid.
* - srtp_err_status_auth_fail if the SRTP packet failed the message
* authentication check.
* - srtp_err_status_replay_fail if the SRTP packet is a replay (e.g. packet has
* already been processed and accepted).
* - [other] if there has been an error in the cryptographic mechanisms.
*
*/
srtp_err_status_t srtp_unprotect(srtp_t ctx, void *srtp_hdr, int *len_ptr);
/**
* @brief srtp_unprotect_mki() is the Secure RTP receiver-side packet
* processing function that checks for MKI.
*
* The function call srtp_unprotect(ctx, srtp_hdr, len_ptr) verifies
* the Secure RTP protection of the SRTP packet pointed to by srtp_hdr
* (which has length *len_ptr), using the SRTP context ctx. If
* srtp_err_status_ok is returned, then srtp_hdr points to the resulting
* RTP packet and *len_ptr is the number of octets in that packet;
* otherwise, no assumptions should be made about the value of either
* data elements.
*
* The sequence numbers of the RTP packets presented to this function
* need not be consecutive, but they @b must be out of order by less
* than 2^15 = 32,768 packets.
*
* @warning This function assumes that the SRTP packet is aligned on a
* 32-bit boundary.
*
* @param ctx is the SRTP session which applies to the particular packet.
*
* @param srtp_hdr is a pointer to the header of the SRTP packet
* (before the call). after the function returns, it points to the
* rtp packet if srtp_err_status_ok was returned; otherwise, the value of
* the data to which it points is undefined.
*
* @param len_ptr is a pointer to the length in octets of the complete
* srtp packet (header and body) before the function call, and of the
* complete rtp packet after the call, if srtp_err_status_ok was returned.
* Otherwise, the value of the data to which it points is undefined.
*
* @param use_mki is a boolean to tell the system if mki is being used. If
* set to false then will use the first set of session keys. If set to true will
* use the session keys identified by the mki_index
*
* @return
* - srtp_err_status_ok if the RTP packet is valid.
* - srtp_err_status_auth_fail if the SRTP packet failed the message
* authentication check.
* - srtp_err_status_replay_fail if the SRTP packet is a replay (e.g. packet has
* already been processed and accepted).
* - srtp_err_status_bad_mki if the MKI in the packet is not a known MKI id
* - [other] if there has been an error in the cryptographic mechanisms.
*
*/
srtp_err_status_t srtp_unprotect_mki(srtp_t ctx, void *srtp_hdr, int *len_ptr,
unsigned int use_mki);
/**
* @brief srtp_create() allocates and initializes an SRTP session.
* The function call srtp_create(session, policy) allocates and
* initializes an SRTP session context, applying the given policy.
*
* @param session is a pointer to the SRTP session to which the policy is
* to be added.
*
* @param policy is the srtp_policy_t struct that describes the policy
* for the session. The struct may be a single element, or it may be
* the head of a list, in which case each element of the list is
* processed. It may also be NULL, in which case streams should be added
* later using srtp_add_stream(). The final element of the list @b must
* have its `next' field set to NULL.
*
* @return
* - srtp_err_status_ok if creation succeded.
* - srtp_err_status_alloc_fail if allocation failed.
* - srtp_err_status_init_fail if initialization failed.
*/
srtp_err_status_t srtp_create(srtp_t *session, const srtp_policy_t *policy);
/**
* @brief srtp_add_stream() allocates and initializes an SRTP stream
* within a given SRTP session.
*
* The function call srtp_add_stream(session, policy) allocates and
* initializes a new SRTP stream within a given, previously created
* session, applying the policy given as the other argument to that
* stream.
*
* @return values:
* - srtp_err_status_ok if stream creation succeded.
* - srtp_err_status_alloc_fail if stream allocation failed
* - srtp_err_status_init_fail if stream initialization failed.
*/
srtp_err_status_t srtp_add_stream(srtp_t session, const srtp_policy_t *policy);
/**
* @brief srtp_remove_stream() deallocates an SRTP stream.
*
* The function call srtp_remove_stream(session, ssrc) removes
* the SRTP stream with the SSRC value ssrc from the SRTP session
* context given by the argument session.
*
* @param session is the SRTP session from which the stream
* will be removed.
*
* @param ssrc is the SSRC value of the stream to be removed
* in network byte order.
*
* @warning Wildcard SSRC values cannot be removed from a
* session.
*
* @return
* - srtp_err_status_ok if the stream deallocation succeded.
* - [other] otherwise.
*
*/
srtp_err_status_t srtp_remove_stream(srtp_t session, unsigned int ssrc);
/**
* @brief srtp_update() udpates all streams in the session.
*
* The function call srtp_update(session, policy) updates
* all the streams in the session applying the given policy
* and key. The exsisting ROC value of all streams will be
* preserved.
*
* @param session is the SRTP session that contains the streams
* to be updated.
*
* @param policy is the srtp_policy_t struct that describes the policy
* for the session. The struct may be a single element, or it may be
* the head of a list, in which case each element of the list is
* processed. The final element of the list @b must
* have its `next' field set to NULL.
*
* @return
* - srtp_err_status_ok if stream creation succeded.
* - srtp_err_status_alloc_fail if stream allocation failed
* - srtp_err_status_init_fail if stream initialization failed.
* - [other] otherwise.
*
*/
srtp_err_status_t srtp_update(srtp_t session, const srtp_policy_t *policy);
/**
* @brief srtp_update_stream() udpates a SRTP stream.
*
* The function call srtp_update_stream(session, policy) updates
* the stream(s) in the session that match applying the given
* policy and key. The exsisting ROC value of all stream(s) will
* be preserved.
*
* @param session is the SRTP session that contains the streams
* to be updated.
*
* @param policy is the srtp_policy_t struct that describes the policy
* for the session.
*
* @return
* - srtp_err_status_ok if stream creation succeded.
* - srtp_err_status_alloc_fail if stream allocation failed
* - srtp_err_status_init_fail if stream initialization failed.
* - [other] otherwise.
*
*/
srtp_err_status_t srtp_update_stream(srtp_t session, const srtp_policy_t *policy);
/**
* @brief srtp_crypto_policy_set_rtp_default() sets a crypto policy
* structure to the SRTP default policy for RTP protection.
*
* @param p is a pointer to the policy structure to be set
*
* The function call crypto_policy_set_rtp_default(&p) sets the
* crypto_policy_t at location p to the SRTP default policy for RTP
* protection, as defined in the specification. This function is a
* convenience that helps to avoid dealing directly with the policy
* data structure. You are encouraged to initialize policy elements
* with this function call. Doing so may allow your code to be
* forward compatible with later versions of libSRTP that include more
* elements in the crypto_policy_t datatype.
*
* @return void.
*
*/
void srtp_crypto_policy_set_rtp_default(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_rtcp_default() sets a crypto policy
* structure to the SRTP default policy for RTCP protection.
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_rtcp_default(&p) sets the
* srtp_crypto_policy_t at location p to the SRTP default policy for RTCP
* protection, as defined in the specification. This function is a
* convenience that helps to avoid dealing directly with the policy
* data structure. You are encouraged to initialize policy elements
* with this function call. Doing so may allow your code to be
* forward compatible with later versions of libSRTP that include more
* elements in the srtp_crypto_policy_t datatype.
*
* @return void.
*
*/
void srtp_crypto_policy_set_rtcp_default(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_cm_128_hmac_sha1_80() sets a crypto
* policy structure to the SRTP default policy for RTP protection.
*
* @param p is a pointer to the policy structure to be set
*
* The function srtp_crypto_policy_set_aes_cm_128_hmac_sha1_80() is a
* synonym for srtp_crypto_policy_set_rtp_default(). It conforms to the
* naming convention used in RFC 4568 (SDP Security Descriptions for
* Media Streams).
*
* @return void.
*
*/
#define srtp_crypto_policy_set_aes_cm_128_hmac_sha1_80(p) srtp_crypto_policy_set_rtp_default(p)
/**
* @brief srtp_crypto_policy_set_aes_cm_128_hmac_sha1_32() sets a crypto
* policy structure to a short-authentication tag policy
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_cm_128_hmac_sha1_32(&p)
* sets the srtp_crypto_policy_t at location p to use policy
* AES_CM_128_HMAC_SHA1_32 as defined in RFC 4568.
* This policy uses AES-128
* Counter Mode encryption and HMAC-SHA1 authentication, with an
* authentication tag that is only 32 bits long. This length is
* considered adequate only for protecting audio and video media that
* use a stateless playback function. See Section 7.5 of RFC 3711
* (http://www.ietf.org/rfc/rfc3711.txt).
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @warning This crypto policy is intended for use in SRTP, but not in
* SRTCP. It is recommended that a policy that uses longer
* authentication tags be used for SRTCP. See Section 7.5 of RFC 3711
* (http://www.ietf.org/rfc/rfc3711.txt).
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_cm_128_hmac_sha1_32(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_cm_128_null_auth() sets a crypto
* policy structure to an encryption-only policy
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_cm_128_null_auth(&p) sets
* the srtp_crypto_policy_t at location p to use the SRTP default cipher
* (AES-128 Counter Mode), but to use no authentication method. This
* policy is NOT RECOMMENDED unless it is unavoidable; see Section 7.5
* of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @warning This policy is NOT RECOMMENDED for SRTP unless it is
* unavoidable, and it is NOT RECOMMENDED at all for SRTCP; see
* Section 7.5 of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_cm_128_null_auth(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_null_cipher_hmac_sha1_80() sets a crypto
* policy structure to an authentication-only policy
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_null_cipher_hmac_sha1_80(&p)
* sets the srtp_crypto_policy_t at location p to use HMAC-SHA1 with an 80
* bit authentication tag to provide message authentication, but to
* use no encryption. This policy is NOT RECOMMENDED for SRTP unless
* there is a requirement to forego encryption.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @warning This policy is NOT RECOMMENDED for SRTP unless there is a
* requirement to forego encryption.
*
* @return void.
*
*/
void srtp_crypto_policy_set_null_cipher_hmac_sha1_80(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_null_cipher_hmac_null() sets a crypto
* policy structure to use no encryption or authentication.
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_null_cipher_hmac_null(&p)
* sets the srtp_crypto_policy_t at location p to use no encryption and
* no authentication. This policy should only be used for testing and
* troubleshootingl.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @warning This policy is NOT RECOMMENDED for SRTP unless there is a
* requirement to forego encryption and authentication.
*
* @return void.
*
*/
void srtp_crypto_policy_set_null_cipher_hmac_null(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_cm_256_hmac_sha1_80() sets a crypto
* policy structure to a encryption and authentication policy using AES-256
* for RTP protection.
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_cm_256_hmac_sha1_80(&p)
* sets the srtp_crypto_policy_t at location p to use policy
* AES_CM_256_HMAC_SHA1_80 as defined in RFC 6188. This policy uses AES-256
* Counter Mode encryption and HMAC-SHA1 authentication, with an 80 bit
* authentication tag.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_cm_256_hmac_sha1_80(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_cm_256_hmac_sha1_32() sets a crypto
* policy structure to a short-authentication tag policy using AES-256
* encryption.
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_cm_256_hmac_sha1_32(&p)
* sets the srtp_crypto_policy_t at location p to use policy
* AES_CM_256_HMAC_SHA1_32 as defined in RFC 6188. This policy uses AES-256
* Counter Mode encryption and HMAC-SHA1 authentication, with an
* authentication tag that is only 32 bits long. This length is
* considered adequate only for protecting audio and video media that
* use a stateless playback function. See Section 7.5 of RFC 3711
* (http://www.ietf.org/rfc/rfc3711.txt).
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @warning This crypto policy is intended for use in SRTP, but not in
* SRTCP. It is recommended that a policy that uses longer
* authentication tags be used for SRTCP. See Section 7.5 of RFC 3711
* (http://www.ietf.org/rfc/rfc3711.txt).
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_cm_256_hmac_sha1_32(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_cm_256_null_auth() sets a crypto
* policy structure to an encryption-only policy
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_cm_256_null_auth(&p) sets
* the srtp_crypto_policy_t at location p to use the SRTP default cipher
* (AES-256 Counter Mode), but to use no authentication method. This
* policy is NOT RECOMMENDED unless it is unavoidable; see Section 7.5
* of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @warning This policy is NOT RECOMMENDED for SRTP unless it is
* unavoidable, and it is NOT RECOMMENDED at all for SRTCP; see
* Section 7.5 of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_cm_256_null_auth(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_cm_192_hmac_sha1_80() sets a crypto
* policy structure to a encryption and authentication policy using AES-192
* for RTP protection.
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_cm_192_hmac_sha1_80(&p)
* sets the crypto_policy_t at location p to use policy
* AES_CM_192_HMAC_SHA1_80 as defined in RFC 6188. This policy uses AES-192
* Counter Mode encryption and HMAC-SHA1 authentication, with an 80 bit
* authentication tag.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the crypto_policy_t datatype.
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_cm_192_hmac_sha1_80(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_cm_192_hmac_sha1_32() sets a crypto
* policy structure to a short-authentication tag policy using AES-192
* encryption.
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_cm_192_hmac_sha1_32(&p)
* sets the crypto_policy_t at location p to use policy
* AES_CM_192_HMAC_SHA1_32 as defined in RFC 6188. This policy uses AES-192
* Counter Mode encryption and HMAC-SHA1 authentication, with an
* authentication tag that is only 32 bits long. This length is
* considered adequate only for protecting audio and video media that
* use a stateless playback function. See Section 7.5 of RFC 3711
* (http://www.ietf.org/rfc/rfc3711.txt).
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the crypto_policy_t datatype.
*
* @warning This crypto policy is intended for use in SRTP, but not in
* SRTCP. It is recommended that a policy that uses longer
* authentication tags be used for SRTCP. See Section 7.5 of RFC 3711
* (http://www.ietf.org/rfc/rfc3711.txt).
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_cm_192_hmac_sha1_32(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_cm_192_null_auth() sets a crypto
* policy structure to an encryption-only policy
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_cm_192_null_auth(&p) sets
* the crypto_policy_t at location p to use the SRTP default cipher
* (AES-192 Counter Mode), but to use no authentication method. This
* policy is NOT RECOMMENDED unless it is unavoidable; see Section 7.5
* of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the crypto_policy_t datatype.
*
* @warning This policy is NOT RECOMMENDED for SRTP unless it is
* unavoidable, and it is NOT RECOMMENDED at all for SRTCP; see
* Section 7.5 of RFC 3711 (http://www.ietf.org/rfc/rfc3711.txt).
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_cm_192_null_auth(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_gcm_128_8_auth() sets a crypto
* policy structure to an AEAD encryption policy.
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_gcm_128_8_auth(&p) sets
* the srtp_crypto_policy_t at location p to use the SRTP default cipher
* (AES-128 Galois Counter Mode) with 8 octet auth tag. This
* policy applies confidentiality and authentication to both the
* RTP and RTCP packets.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_gcm_128_8_auth(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_gcm_256_8_auth() sets a crypto
* policy structure to an AEAD encryption policy
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_gcm_256_8_auth(&p) sets
* the srtp_crypto_policy_t at location p to use the SRTP default cipher
* (AES-256 Galois Counter Mode) with 8 octet auth tag. This
* policy applies confidentiality and authentication to both the
* RTP and RTCP packets.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_gcm_256_8_auth(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_gcm_128_8_only_auth() sets a crypto
* policy structure to an AEAD authentication-only policy
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_gcm_128_8_only_auth(&p) sets
* the srtp_crypto_policy_t at location p to use the SRTP default cipher
* (AES-128 Galois Counter Mode) with 8 octet auth tag. This policy
* applies confidentiality and authentication to the RTP packets,
* but only authentication to the RTCP packets.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_gcm_128_8_only_auth(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_gcm_256_8_only_auth() sets a crypto
* policy structure to an AEAD authentication-only policy
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_gcm_256_8_only_auth(&p) sets
* the srtp_crypto_policy_t at location p to use the SRTP default cipher
* (AES-256 Galois Counter Mode) with 8 octet auth tag. This policy
* applies confidentiality and authentication to the RTP packets,
* but only authentication to the RTCP packets.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_gcm_256_8_only_auth(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_gcm_128_16_auth() sets a crypto
* policy structure to an AEAD encryption policy.
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_gcm_128_16_auth(&p) sets
* the srtp_crypto_policy_t at location p to use the SRTP default cipher
* (AES-128 Galois Counter Mode) with 16 octet auth tag. This
* policy applies confidentiality and authentication to both the
* RTP and RTCP packets.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_gcm_128_16_auth(srtp_crypto_policy_t *p);
/**
* @brief srtp_crypto_policy_set_aes_gcm_256_16_auth() sets a crypto
* policy structure to an AEAD encryption policy
*
* @param p is a pointer to the policy structure to be set
*
* The function call srtp_crypto_policy_set_aes_gcm_256_16_auth(&p) sets
* the srtp_crypto_policy_t at location p to use the SRTP default cipher
* (AES-256 Galois Counter Mode) with 16 octet auth tag. This
* policy applies confidentiality and authentication to both the
* RTP and RTCP packets.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @return void.
*
*/
void srtp_crypto_policy_set_aes_gcm_256_16_auth(srtp_crypto_policy_t *p);
/**
* @brief srtp_dealloc() deallocates storage for an SRTP session
* context.
*
* The function call srtp_dealloc(s) deallocates storage for the
* SRTP session context s. This function should be called no more
* than one time for each of the contexts allocated by the function
* srtp_create().
*
* @param s is the srtp_t for the session to be deallocated.
*
* @return
* - srtp_err_status_ok if there no problems.
* - srtp_err_status_dealloc_fail a memory deallocation failure occured.
*/
srtp_err_status_t srtp_dealloc(srtp_t s);
/*
* @brief identifies a particular SRTP profile
*
* An srtp_profile_t enumeration is used to identify a particular SRTP
* profile (that is, a set of algorithms and parameters). These profiles
* are defined for DTLS-SRTP:
* https://www.iana.org/assignments/srtp-protection/srtp-protection.xhtml
*/
typedef enum {
srtp_profile_reserved = 0,
srtp_profile_aes128_cm_sha1_80 = 1,
srtp_profile_aes128_cm_sha1_32 = 2,
srtp_profile_null_sha1_80 = 5,
srtp_profile_null_sha1_32 = 6,
srtp_profile_aead_aes_128_gcm = 7,
srtp_profile_aead_aes_256_gcm = 8,
} srtp_profile_t;
/**
* @brief srtp_crypto_policy_set_from_profile_for_rtp() sets a crypto policy
* structure to the appropriate value for RTP based on an srtp_profile_t
*
* @param policy is a pointer to the policy structure to be set
*
* @param profile is an enumeration for the policy to be set
*
* The function call srtp_crypto_policy_set_rtp_default(&policy, profile)
* sets the srtp_crypto_policy_t at location policy to the policy for RTP
* protection, as defined by the srtp_profile_t profile.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @return values
* - srtp_err_status_ok no problems were encountered
* - srtp_err_status_bad_param the profile is not supported
*
*/
srtp_err_status_t srtp_crypto_policy_set_from_profile_for_rtp(srtp_crypto_policy_t *policy, srtp_profile_t profile);
/**
* @brief srtp_crypto_policy_set_from_profile_for_rtcp() sets a crypto policy
* structure to the appropriate value for RTCP based on an srtp_profile_t
*
* @param policy is a pointer to the policy structure to be set
*
* @param profile is an enumeration for the policy to be set
*
* The function call srtp_crypto_policy_set_rtcp_default(&policy, profile)
* sets the srtp_crypto_policy_t at location policy to the policy for RTCP
* protection, as defined by the srtp_profile_t profile.
*
* This function is a convenience that helps to avoid dealing directly
* with the policy data structure. You are encouraged to initialize
* policy elements with this function call. Doing so may allow your
* code to be forward compatible with later versions of libSRTP that
* include more elements in the srtp_crypto_policy_t datatype.
*
* @return values
* - srtp_err_status_ok no problems were encountered
* - srtp_err_status_bad_param the profile is not supported
*
*/
srtp_err_status_t srtp_crypto_policy_set_from_profile_for_rtcp(srtp_crypto_policy_t *policy, srtp_profile_t profile);
/**
* @brief returns the master key length for a given SRTP profile
*/
unsigned int
srtp_profile_get_master_key_length(srtp_profile_t profile);
/**
* @brief returns the master salt length for a given SRTP profile
*/
unsigned int
srtp_profile_get_master_salt_length(srtp_profile_t profile);
/**
* @brief appends the salt to the key
*
* The function call srtp_append_salt_to_key(k, klen, s, slen)
* copies the string s to the location at klen bytes following
* the location k.
*
* @warning There must be at least bytes_in_salt + bytes_in_key bytes
* available at the location pointed to by key.
*
*/
void
srtp_append_salt_to_key(unsigned char *key, unsigned int bytes_in_key,
unsigned char *salt, unsigned int bytes_in_salt);
/**
* @}
*/
/**
* @defgroup SRTCP Secure RTCP
* @ingroup SRTP
*
* @brief Secure RTCP functions are used to protect RTCP traffic.
*
* RTCP is the control protocol for RTP. libSRTP protects RTCP
* traffic in much the same way as it does RTP traffic. The function
* srtp_protect_rtcp() applies cryptographic protections to outbound
* RTCP packets, and srtp_unprotect_rtcp() verifies the protections on
* inbound RTCP packets.
*
* A note on the naming convention: srtp_protect_rtcp() has an srtp_t
* as its first argument, and thus has `srtp_' as its prefix. The
* trailing `_rtcp' indicates the protocol on which it acts.
*
* @{
*/
/**
* @brief srtp_protect_rtcp() is the Secure RTCP sender-side packet
* processing function.
*
* The function call srtp_protect_rtcp(ctx, rtp_hdr, len_ptr) applies
* SRTCP protection to the RTCP packet rtcp_hdr (which has length
* *len_ptr) using the SRTP session context ctx. If srtp_err_status_ok is
* returned, then rtp_hdr points to the resulting SRTCP packet and
* *len_ptr is the number of octets in that packet; otherwise, no
* assumptions should be made about the value of either data elements.
*
* @warning This function assumes that it can write the authentication
* tag into the location in memory immediately following the RTCP
* packet, and assumes that the RTCP packet is aligned on a 32-bit
* boundary.
*
* @warning This function assumes that it can write SRTP_MAX_TRAILER_LEN+4
* into the location in memory immediately following the RTCP packet.
* Callers MUST ensure that this much writable memory is available in
* the buffer that holds the RTCP packet.
*
* @param ctx is the SRTP context to use in processing the packet.
*
* @param rtcp_hdr is a pointer to the RTCP packet (before the call); after
* the function returns, it points to the srtp packet.
*
* @param pkt_octet_len is a pointer to the length in octets of the
* complete RTCP packet (header and body) before the function call,
* and of the complete SRTCP packet after the call, if srtp_err_status_ok
* was returned. Otherwise, the value of the data to which it points
* is undefined.
*
* @return
* - srtp_err_status_ok if there were no problems.
* - [other] if there was a failure in
* the cryptographic mechanisms.
*/
srtp_err_status_t srtp_protect_rtcp(srtp_t ctx, void *rtcp_hdr, int *pkt_octet_len);
/**
* @brief srtp_protect_rtcp_mki() is the Secure RTCP sender-side packet
* processing function that can utilize mki.
*
* The function call srtp_protect_rtcp(ctx, rtp_hdr, len_ptr) applies
* SRTCP protection to the RTCP packet rtcp_hdr (which has length
* *len_ptr) using the SRTP session context ctx. If srtp_err_status_ok is
* returned, then rtp_hdr points to the resulting SRTCP packet and
* *len_ptr is the number of octets in that packet; otherwise, no
* assumptions should be made about the value of either data elements.
*
* @warning This function assumes that it can write the authentication
* tag into the location in memory immediately following the RTCP
* packet, and assumes that the RTCP packet is aligned on a 32-bit
* boundary.
*
* @warning This function assumes that it can write SRTP_MAX_TRAILER_LEN+4
* into the location in memory immediately following the RTCP packet.
* Callers MUST ensure that this much writable memory is available in
* the buffer that holds the RTCP packet.
*
* @param ctx is the SRTP context to use in processing the packet.
*
* @param rtcp_hdr is a pointer to the RTCP packet (before the call); after
* the function returns, it points to the srtp packet.
*
* @param pkt_octet_len is a pointer to the length in octets of the
* complete RTCP packet (header and body) before the function call,
* and of the complete SRTCP packet after the call, if srtp_err_status_ok
* was returned. Otherwise, the value of the data to which it points
* is undefined.
*
* @param use_mki is a boolean to tell the system if mki is being used. If
* set to false then will use the first set of session keys. If set to true will
* use the session keys identified by the mki_index
*
* @param mki_index integer value specifying which set of session kesy should be
* used if use_mki is set to true.
*
* @return
* - srtp_err_status_ok if there were no problems.
* - [other] if there was a failure in
* the cryptographic mechanisms.
*/
srtp_err_status_t srtp_protect_rtcp_mki(srtp_t ctx, void *rtcp_hdr, int *pkt_octet_len,
unsigned int use_mki, unsigned int mki_index);
/**
* @brief srtp_unprotect_rtcp() is the Secure RTCP receiver-side packet
* processing function.
*
* The function call srtp_unprotect_rtcp(ctx, srtp_hdr, len_ptr)
* verifies the Secure RTCP protection of the SRTCP packet pointed to
* by srtcp_hdr (which has length *len_ptr), using the SRTP session
* context ctx. If srtp_err_status_ok is returned, then srtcp_hdr points
* to the resulting RTCP packet and *len_ptr is the number of octets
* in that packet; otherwise, no assumptions should be made about the
* value of either data elements.
*
* @warning This function assumes that the SRTCP packet is aligned on a
* 32-bit boundary.
*
* @param ctx is a pointer to the srtp_t which applies to the
* particular packet.
*
* @param srtcp_hdr is a pointer to the header of the SRTCP packet
* (before the call). After the function returns, it points to the
* rtp packet if srtp_err_status_ok was returned; otherwise, the value of
* the data to which it points is undefined.
*
* @param pkt_octet_len is a pointer to the length in octets of the
* complete SRTCP packet (header and body) before the function call,
* and of the complete rtp packet after the call, if srtp_err_status_ok was
* returned. Otherwise, the value of the data to which it points is
* undefined.
*
* @return
* - srtp_err_status_ok if the RTCP packet is valid.
* - srtp_err_status_auth_fail if the SRTCP packet failed the message
* authentication check.
* - srtp_err_status_replay_fail if the SRTCP packet is a replay (e.g. has
* already been processed and accepted).
* - [other] if there has been an error in the cryptographic mechanisms.
*
*/
srtp_err_status_t srtp_unprotect_rtcp(srtp_t ctx, void *srtcp_hdr, int *pkt_octet_len);
/**
* @brief srtp_unprotect_rtcp() is the Secure RTCP receiver-side packet
* processing function.
*
* The function call srtp_unprotect_rtcp(ctx, srtp_hdr, len_ptr)
* verifies the Secure RTCP protection of the SRTCP packet pointed to
* by srtcp_hdr (which has length *len_ptr), using the SRTP session
* context ctx. If srtp_err_status_ok is returned, then srtcp_hdr points
* to the resulting RTCP packet and *len_ptr is the number of octets
* in that packet; otherwise, no assumptions should be made about the
* value of either data elements.
*
* @warning This function assumes that the SRTCP packet is aligned on a
* 32-bit boundary.
*
* @param ctx is a pointer to the srtp_t which applies to the
* particular packet.
*
* @param srtcp_hdr is a pointer to the header of the SRTCP packet
* (before the call). After the function returns, it points to the
* rtp packet if srtp_err_status_ok was returned; otherwise, the value of
* the data to which it points is undefined.
*
* @param pkt_octet_len is a pointer to the length in octets of the
* complete SRTCP packet (header and body) before the function call,
* and of the complete rtp packet after the call, if srtp_err_status_ok was
* returned. Otherwise, the value of the data to which it points is
* undefined.
*
* @param use_mki is a boolean to tell the system if mki is being used. If
* set to false then will use the first set of session keys. If set to true will
* use the session keys identified by the mki_index
*
* @return
* - srtp_err_status_ok if the RTCP packet is valid.
* - srtp_err_status_auth_fail if the SRTCP packet failed the message
* authentication check.
* - srtp_err_status_replay_fail if the SRTCP packet is a replay (e.g. has
* already been processed and accepted).
* - srtp_err_status_bad_mki if the MKI in the packet is not a known MKI id
* - [other] if there has been an error in the cryptographic mechanisms.
*
*/
srtp_err_status_t srtp_unprotect_rtcp_mki(srtp_t ctx, void *srtcp_hdr,
int *pkt_octet_len,
unsigned int use_mki);
/**
* @}
*/
/**
* @defgroup User data associated to a SRTP session.
* @ingroup SRTP
*
* @brief Store custom user data within a SRTP session.
*
* @{
*/
/**
* @brief srtp_set_user_data() stores the given pointer into the SRTP
* session for later retrieval.
*
* @param ctx is the srtp_t context in which the given data pointer is
* stored.
*
* @param data is a pointer to the custom information (struct, function,
* etc) associated with the SRTP session.
*
* @return void.
*
*/
void
srtp_set_user_data(srtp_t ctx, void *data);
/**
* @brief srtp_get_user_data() retrieves the pointer to the custom data
* previously stored with srtp_set_user_data().
*
* This function is mostly useful for retrieving data associated to a
* SRTP session when an event fires. The user can then get such a custom
* data by calling this function with the session field of the
* srtp_event_data_t struct as argument.
*
* @param ctx is the srtp_t context in which the given data pointer was
* stored.
*
* @return void* pointer to the user data.
*
*/
void*
srtp_get_user_data(srtp_t ctx);
/**
* @}
*/
/**
* @defgroup SRTPevents SRTP events and callbacks
* @ingroup SRTP
*
* @brief libSRTP can use a user-provided callback function to
* handle events.
*
*
* libSRTP allows a user to provide a callback function to handle
* events that need to be dealt with outside of the data plane (see
* the enum srtp_event_t for a description of these events). Dealing
* with these events is not a strict necessity; they are not
* security-critical, but the application may suffer if they are not
* handled. The function srtp_set_event_handler() is used to provide
* the callback function.
*
* A default event handler that merely reports on the events as they
* happen is included. It is also possible to set the event handler
* function to NULL, in which case all events will just be silently
* ignored.
*
* @{
*/
/**
* @brief srtp_event_t defines events that need to be handled
*
* The enum srtp_event_t defines events that need to be handled
* outside the `data plane', such as SSRC collisions and
* key expirations.
*
* When a key expires or the maximum number of packets has been
* reached, an SRTP stream will enter an `expired' state in which no
* more packets can be protected or unprotected. When this happens,
* it is likely that you will want to either deallocate the stream
* (using srtp_remove_stream()), and possibly allocate a new one.
*
* When an SRTP stream expires, the other streams in the same session
* are unaffected, unless key sharing is used by that stream. In the
* latter case, all of the streams in the session will expire.
*/
typedef enum {
event_ssrc_collision, /**<
* An SSRC collision occured.
*/
event_key_soft_limit, /**< An SRTP stream reached the soft key
* usage limit and will expire soon.
*/
event_key_hard_limit, /**< An SRTP stream reached the hard
* key usage limit and has expired.
*/
event_packet_index_limit /**< An SRTP stream reached the hard
* packet limit (2^48 packets).
*/
} srtp_event_t;
/**
* @brief srtp_event_data_t is the structure passed as a callback to
* the event handler function
*
* The struct srtp_event_data_t holds the data passed to the event
* handler function.
*/
typedef struct srtp_event_data_t {
srtp_t session; /**< The session in which the event happend. */
uint32_t ssrc; /**< The ssrc in host order of the stream in which the event happend */
srtp_event_t event; /**< An enum indicating the type of event. */
} srtp_event_data_t;
/**
* @brief srtp_event_handler_func_t is the function prototype for
* the event handler.
*
* The typedef srtp_event_handler_func_t is the prototype for the
* event handler function. It has as its only argument an
* srtp_event_data_t which describes the event that needs to be handled.
* There can only be a single, global handler for all events in
* libSRTP.
*/
typedef void (srtp_event_handler_func_t)(srtp_event_data_t *data);
/**
* @brief sets the event handler to the function supplied by the caller.
*
* The function call srtp_install_event_handler(func) sets the event
* handler function to the value func. The value NULL is acceptable
* as an argument; in this case, events will be ignored rather than
* handled.
*
* @param func is a pointer to a fuction that takes an srtp_event_data_t
* pointer as an argument and returns void. This function
* will be used by libSRTP to handle events.
*/
srtp_err_status_t srtp_install_event_handler(srtp_event_handler_func_t func);
/**
* @brief Returns the version string of the library.
*
*/
const char *srtp_get_version_string(void);
/**
* @brief Returns the numeric representation of the library version.
*
*/
unsigned int srtp_get_version(void);
/**
* @brief srtp_set_debug_module(mod_name, v)
*
* sets dynamic debugging to the value v (0 for off, 1 for on) for the
* debug module with the name mod_name
*
* returns err_status_ok on success, err_status_fail otherwise
*/
srtp_err_status_t srtp_set_debug_module(const char *mod_name, int v);
/**
* @brief srtp_list_debug_modules() outputs a list of debugging modules
*
*/
srtp_err_status_t srtp_list_debug_modules(void);
/**
* @brief srtp_log_level_t defines log levels.
*
* The enumeration srtp_log_level_t defines log levels reported
* in the srtp_log_handler_func_t.
*
*/
typedef enum {
srtp_log_level_error, /**< log level is reporting an error message */
srtp_log_level_warning, /**< log level is reporting a warning message */
srtp_log_level_info, /**< log level is reporting an info message */
srtp_log_level_debug /**< log level is reporting a debug message */
} srtp_log_level_t;
/**
* @brief srtp_log_handler_func_t is the function prototype for
* the log handler.
*
* The typedef srtp_event_handler_func_t is the prototype for the
* event handler function. It has as srtp_log_level_t, log
* message and data as arguments.
* There can only be a single, global handler for all log messages in
* libSRTP.
*/
typedef void (srtp_log_handler_func_t)(srtp_log_level_t level, const char * msg, void *data);
/**
* @brief sets the log handler to the function supplied by the caller.
*
* The function call srtp_install_log_handler(func) sets the log
* handler function to the value func. The value NULL is acceptable
* as an argument; in this case, log messages will be ignored.
* This function can be called before srtp_init() inorder to capture
* any logging during start up.
*
* @param func is a pointer to a fuction of type srtp_log_handler_func_t.
* This function will be used by libSRTP to output log messages.
* @param data is a user pointer that will be returned as the data argument in func.
*/
srtp_err_status_t srtp_install_log_handler(srtp_log_handler_func_t func, void *data);
/**
* @brief srtp_get_protect_trailer_length(session, use_mki, mki_index, length)
*
* Determines the length of the amount of data Lib SRTP will add to the
* packet during the protect process. The length is returned in the length parameter
*
* returns err_status_ok on success, err_status_bad_mki if the MKI index is invalid
*
*/
srtp_err_status_t srtp_get_protect_trailer_length(srtp_t session, uint32_t use_mki,
uint32_t mki_index, uint32_t *length);
/**
* @brief srtp_get_protect_rtcp_trailer_length(session, use_mki, mki_index, length)
*
* Determines the length of the amount of data Lib SRTP will add to the
* packet during the protect process. The length is returned in the length parameter
*
* returns err_status_ok on success, err_status_bad_mki if the MKI index is invalid
*
*/
srtp_err_status_t srtp_get_protect_rtcp_trailer_length(srtp_t session, uint32_t use_mki,
uint32_t mki_index, uint32_t *length);
/**
* @brief srtp_set_stream_roc(session, ssrc, roc)
*
* Set the roll-over-counter on a session for a given SSRC
*
* returns err_status_ok on success, srtp_err_status_bad_param if there is no
* stream found
*
*/
srtp_err_status_t srtp_set_stream_roc(srtp_t session, uint32_t ssrc, uint32_t roc);
/**
* @brief srtp_get_stream_roc(session, ssrc, roc)
*
* Get the roll-over-counter on a session for a given SSRC
*
* returns err_status_ok on success, srtp_err_status_bad_param if there is no
* stream found
*
*/
srtp_err_status_t srtp_get_stream_roc(srtp_t session, uint32_t ssrc, uint32_t *roc);
/**
* @}
*/
/* in host order, so outside the #if */
#define SRTCP_E_BIT 0x80000000
/* for byte-access */
#define SRTCP_E_BYTE_BIT 0x80
#define SRTCP_INDEX_MASK 0x7fffffff
#ifdef __cplusplus
}
#endif
#endif /* SRTP_SRTP_H */
Reference in a new issue Copy permalink