The functions SDL_malloc(), SDL_free() and SDL_strdup() were used only
because strdup() was not available everywhere.
Now that it is available, use the native version of these functions.
Small unsigned integers promote to signed int. As a consequence, if v is
a uint8_t, then (v << 24) yields an int, so the left shift is undefined
if the MSB is 1.
Cast to uint32_t to yield an unsigned value.
Reported by USAN (meson x -Db_sanitize=undefined):
runtime error: left shift of 255 by 24 places cannot be represented
in type 'int'
The current process could be waited both by run_file_handler() and
file_handler_stop().
To avoid the race condition, wait the process without closing, then
close with mutex locked.
There were two versions: process_wait() and process_wait_noclose().
Expose a single version with a flag (it was already implemented that way
internally).
The function process_wait() returned a bool (true if the process
terminated successfully) and provided the exit code via an output
parameter exit_code.
But the returned value was always equivalent to exit_code == 0, so just
return the exit code instead.
The size, point and position structs were defined in common.h. Move them
to coords.h so that common.h could be used for generic code to be
included in all source files.
The header libavformat/version.h was included, but not
libavcodec/version.h.
As a consequence, the LIBAVCODEC_VERSION_INT definition depended on the
caller includes.
On Linux, waitpid() both waits for the process to terminate and reaps it
(closes its handle). On Windows, these actions are separated into
WaitForSingleObject() and CloseHandle().
Expose these actions separately, so that it is possible to send a signal
to a process while waiting for its termination without race condition.
This allows to wait for server termination normally, but kill the
process without race condition if it is not terminated after some delay.
Let the server terminate properly once all the sockets are closed.
If it does not terminate (this can happen if the device is asleep), then
kill it.
Note: since the server process termination is detected by a flag set
after waitpid() returns, there is a small chance that the process
terminates (and the PID assigned to a new process) before the flag is
set but before the kill() call. This race condition already existed
before this commit.
Fixes#1992 <https://github.com/Genymobile/scrcpy/issues/1992>
TerminateProcess() is "equivalent" to kill(), while
WaitForSingleObject() is "equivalent" to waitpid(), so the handle must
be closed after WaitForSingleObject().
On Windows, scrcpy paused on error before exiting to give the user a
chance to see the user message.
This was a hack and causes issues when using scrcpy from batch scripts.
Disable this pause from the scrcpy binary, and provide a batch wrapper
(scrcpy-console.bat) to pause on error.
Fixes#1875 <https://github.com/Genymobile/scrcpy/issues/1875>
Use "%Iu" on Windows. This fixes the following warning:
../app/src/sys/win/command.c:17:14: warning: unknown conversion type character ‘l’ in format [-Wformat=]
17 | LOGE("Command too long (%" PRIsizet " chars)", len - 1);
A new "repeat" field has been added by
3c1ed5d86c, but it was not initialized in
every code path.
As a consequence, keycodes generated by shortcuts were sent with an
undetermined value, breaking some shortcuts (especially HOME) randomly.
Fixes#1643 <https://github.com/Genymobile/scrcpy/issues/1643>
This avoids to pass specific options values individually. Since these
function are static (internal to the file), this is not a problem to
make them depend on scrcpy_options.
Refs #1623 <https://github.com/Genymobile/scrcpy/pull/1623>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Send COPY and CUT on MOD+c and MOD+x (only supported for Android >= 7).
The shortcuts Ctrl+c and Ctrl+x should generally also work (even before
Android 7), but the active Android app may use them for other actions
instead.
Do not explicitly set the clipboard text if it already contains the
expected content.
Even if copy-paste loops are avoided by the previous commit, this avoids
to trigger a clipboard change on the computer-side.
Refs #1580 <https://github.com/Genymobile/scrcpy/issues/1580>
Pressing Ctrl+v on the device will typically paste the clipboard
content.
Before sending the key event, synchronize the computer clipboard to the
device clipboard to allow seamless copy-paste.
Now that the scrcpy shortcut modifier is Alt by default (and can be
configured), forward Ctrl to the device.
This allows to trigger Android shortcuts.
Fixes#555 <https://github.com/Genymobile/scrcpy/issues/555>
Pressing Alt+c generates a text event containing "c", so "c" was sent to
the device when --prefer-text was enabled.
Ignore text events when the mod state matches a shortcut modifier.
Remove the Cmd modifier on macOS, which was possible only for some
shortcuts but not all.
This paves the way to make the shortcut modifier customizable.
Touch events were HiDPI-scaled twice:
- once because the position (provided as floats between 0 and 1) were
converted in pixels using the drawable size (not the window size)
- once due to screen_convert_to_frame_coords()
One possible fix could be to compute the position in pixels from the
window size instead, but this would unnecessarily round the event
position to the nearest window coordinates (instead of drawable
coordinates).
Instead, expose two separate functions to convert to frame coordinates
from either window or drawable coordinates.
Fixes#1536 <https://github.com/Genymobile/scrcpy/issues/1536>
Refs #15 <https://github.com/Genymobile/scrcpy/issues/15>
Refs e40532a376
The header scrcpy.h is intended to be the "public" API. It should not
depend on other internal headers.
Therefore, declare all required structs in this header and adapt
internal code.
The function must return a SDL_LogPriority, but returned an enum
sc_log_level.
(It was harmless because this specific return should never happen, as
asserted.)
This reverts commit 8c8649cfcd.
I cannot reproduce the issue with Ctrl+Shift+o on any device, so in
practice it works, it's too bad to remove the feature for a random bug
on some Android versions on some devices.
Add a command-line option to force "adb forward", without attempting
"adb reverse" first.
This is especially useful for using SSH tunnels without enabling remote
port forwarding.
The verbosity was set either to info (in release mode) or debug (in
debug mode).
Add a command-line argument to change it, so that users can enable debug
logs using the release:
scrcpy -Vdebug
The field lock_video_orientation may only take values between -1 and 3
(included). But the compiler may trigger a warning on the sprintf()
call, because its type could represent values which could overflow the
string (like "-128"):
> warning: ‘%i’ directive writing between 1 and 4 bytes into a region of
> size 3 [-Wformat-overflow=]
Increase the buffer size to remove the warning.
Trilinear filtering can currently only be enabled for OpenGL renderers.
Do not print a warning if the renderer is not OpenGL, as it can confuses
users, while nothing is wrong.
On macOS with renderer "metal", HiDPI scaling may be incorrect on
initialization when several displays are connected.
Resetting the window size fixes the problem.
Refs #15 <https://github.com/Genymobile/scrcpy/issues/15>
Position and scale the content "manually" instead of relying on the
renderer "logical size".
This avoids possible rounding differences between the computed window
size and the content size, causing one row or column of black pixels on
the bottom or on the right.
This also avoids HiDPI scale issues, by computing the scaling manually.
This will also enable to draw items at their expected size on the screen
(unscaled).
Fixes#15 <https://github.com/Genymobile/scrcpy/issues/15>
In maximized state (but not fullscreen), it was possible to resize to
fit the device screen (with Ctrl+x or double-clicking on black borders).
This caused problems on macOS with the "expand to fullscreen" feature,
which behaves like a fullscreen mode but is seen as maximized by SDL.
In that state, resizing to fit causes unexpected results.
To keep the behavior consistent on all platforms, just disable "resize
to fit" when the window is maximized.
