Interrupt any blocking call on process terminated, like on
server_stop().
This allows to interrupt any blocking accept() with correct
synchronization without additional complexity.
Define server callbacks, start the server asynchronously and listen to
connection events to initialize scrcpy properly.
It will help to simplify the server code, and allows to run the UI event
loop while the server is connecting. In particular, this will allow to
receive SIGINT/Ctrl+C events during connection to interrupt immediately.
Currently, server_stop() is called from the same thread as
server_connect_to(), so interruption may never happen.
This is a step to prepare executing the server from a dedicated thread.
Use the option descriptions to generate the optstring and longopts
parameters for the getopt_long() command.
That way, the options are completely described in a single place.
On Linux, socket functions are unblocked by shutdown(), but on Windows
they are unblocked by closesocket().
Expose net_interrupt() and net_close() to abstract these differences:
- net_interrupt() calls shutdown() on Linux and closesocket() on
Windows (if not already called);
- net_close() calls close() on Linux and closesocket() on Windows (if
not already called).
This simplifies the server code, and prevents a data race on close
(reported by TSAN) on Linux (but does not fix it on Windows):
WARNING: ThreadSanitizer: data race (pid=836124)
Write of size 8 at 0x7ba0000000d0 by main thread:
#0 close ../../../../src/libsanitizer/tsan/tsan_interceptors_posix.cpp:1690 (libtsan.so.0+0x359d8)
#1 net_close ../app/src/util/net.c:211 (scrcpy+0x1c76b)
#2 close_socket ../app/src/server.c:330 (scrcpy+0x19442)
#3 server_stop ../app/src/server.c:522 (scrcpy+0x19e33)
#4 scrcpy ../app/src/scrcpy.c:532 (scrcpy+0x156fc)
#5 main ../app/src/main.c:92 (scrcpy+0x622a)
Previous read of size 8 at 0x7ba0000000d0 by thread T6:
#0 recv ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:6603 (libtsan.so.0+0x4f4a6)
#1 net_recv ../app/src/util/net.c:167 (scrcpy+0x1c5a7)
#2 run_receiver ../app/src/receiver.c:76 (scrcpy+0x12819)
#3 <null> <null> (libSDL2-2.0.so.0+0x84f40)
When Ctrl+v is pressed, a control is sent to the device to set the
device clipboard before injecting Ctrl+v.
With the InputManager method, it is guaranteed that the device
synchronization is executed before handling Ctrl+v, since the commands
are executed on the device in sequence.
However, HID are injected from the computer, so there is no such
guarantee. As a consequence, on Android, Ctrl+v triggers a paste with
the old clipboard content.
To workaround the issue, wait a bit (2 milliseconds) from the AOA
thread before injecting the event, to leave enough time for the
clipboard to be set before injecting Ctrl+v.
When an AOA HID keyboard is registered, CAPSLOCK and NUMLOCK are both
disabled, regardless of the state of the computer keyboard.
To synchronize the state, on first key event, inject CAPSLOCK and/or
NUMLOCK if necessary.
The serial is necessary to find the correct Android device for AOA.
If it is not explicitly provided by the user via -s, then execute "adb
getserialno" to retrieve it.
The AVOutputFormat name is a comma-separated list. In theory, possible
names for V4L2 are:
- "video4linux2,v4l2"
- "v4l2,video4linux2"
- "v4l2"
- "video4linux2"
To find the muxer in all cases, we must request exactly one muxer name
at a time.
PR #2718 <https://github.com/Genymobile/scrcpy/pull/2718>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
The first frames are typically received and decoded with more delay than
the others, causing a wrong slope estimation on start.
To compensate, assume an initial slope of 1, then progressively use the
estimated slope.
To minimize latency (at the cost of jitter), scrcpy always displays a
frame as soon as it available, without waiting.
However, when recording (--record), it still writes the captured
timestamps to the output file, so that the recorded file can be played
correctly without jitter.
Some real-time use cases might benefit from adding a small latency to
compensate for jitter too. For example, few tens of seconds of latency
for live-streaming are not important, but jitter is noticeable.
Therefore, implement a buffering mechanism (disabled by default) to add
a configurable latency delay.
PR #2417 <https://github.com/Genymobile/scrcpy/issues/2417>
Currently, a frame is available to the consumer as soon as it is pushed
by the producer (which can detect if the previous frame is skipped).
Notify the new frames (and frame skipped) via callbacks instead.
This paves the way to add (optional) buffering, which will introduce a
delay between the time when the frame is produced and the time it is
available to be consumed.
The current video buffer only stores one pending frame.
In order to add a new buffering feature, move this part to a separate
"frame buffer". Keep the video_buffer, which currently delegates all its
calls to the frame_buffer.
To fix a data race, commit 5caeab5f6d
called video_buffer_push() and video_buffer_consume() under the
v4l2_sink lock.
Instead, use the previous_skipped indication (initialized with video
buffer locked) to lock only for protecting the has_frame flag.
This enables the possibility for the video_buffer to notify new frames
via callbacks without lock inversion issues.
The function sc_cond_timedwait() accepted a parameter representing the
max duration to wait, because it internally uses SDL_CondWaitTimeout().
Instead, accept a deadline, to be consistent with
pthread_cond_timedwait().
