diff --git a/doc/develop.md b/doc/develop.md index bd409fff..67d7f9b0 100644 --- a/doc/develop.md +++ b/doc/develop.md @@ -9,16 +9,52 @@ This application is composed of two parts: The client is responsible to push the server to the device and start its execution. -Once the client and the server are connected to each other, the server initially -sends device information (name and initial screen dimensions), then starts to -send a raw H.264 video stream of the device screen. The client decodes the video -frames, and display them as soon as possible, without buffering, to minimize -latency. The client is not aware of the device rotation (which is handled by the -server), it just knows the dimensions of the video frames. +The client and the server establish communication using separate sockets for +video, audio and controls. Any of them may be disabled (but not all), so +there are 1, 2 or 3 socket(s). -The client captures relevant keyboard and mouse events, that it transmits to the -server, which injects them to the device. +The server initially sends the device name on the first socket (it is used for +the scrcpy window title), then each socket is used for its own purpose. All +reads and writes are performed from a dedicated thread for each socket, both on +the client and on the server. +If video is enabled, then the server sends a raw video stream (H.264 by default) +of the device screen, with some additional headers for each packet. The client +decodes the video frames, and displays them as soon as possible, without +buffering (unless `--display-buffer=delay` is specified) to minimize latency. +The client is not aware of the device rotation (which is handled by the server), +it just knows the dimensions of the video frames it receives. + +Similarly, if audio is enabled, then the server sends a raw audio stream (OPUS +by default) of the device audio output (or the microphone if +`--audio-source=mic` is specified), with some additional headers for each +packet. The client decodes the stream, attempts to keep a minimal latency by +maintaining an average buffering. The [blog post][scrcpy2] of the scrcpy v2.0 +release gives more details about the audio feature. + +If control is enabled, then the client captures relevant keyboard and mouse +events, that it transmits to the server, which injects them to the device. This +is the only socket which is used in both direction: input events are sent from +the client to the device, and when the device clipboard changes, the new content +is sent from the device to the client to support seamless copy-paste. + +[scrcpy2]: https://blog.rom1v.com/2023/03/scrcpy-2-0-with-audio/ + +Note that the client-server roles are expressed at the application level: + + - the server _serves_ video and audio streams, and handle requests from the + client, + - the client _controls_ the device through the server. + +However, by default (when `--force-adb-forward` is not set), the roles are +reversed at the network level: + + - the client opens a server socket and listen on a port before starting the + server, + - the server connects to the client. + +This role inversion guarantees that the connection will not fail due to race +conditions without polling. ## Server @@ -32,15 +68,14 @@ The server is a Java application (with a [`public static void main(String... args)`][main] method), compiled against the Android framework, and executed as `shell` on the Android device. -[main]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/server/src/main/java/com/genymobile/scrcpy/Server.java#L123 +[main]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/Server.java#L193 To run such a Java application, the classes must be [_dexed_][dex] (typically, to `classes.dex`). If `my.package.MainClass` is the main class, compiled to `classes.dex`, pushed to the device in `/data/local/tmp`, then it can be run with: - adb shell CLASSPATH=/data/local/tmp/classes.dex \ - app_process / my.package.MainClass + adb shell CLASSPATH=/data/local/tmp/classes.dex app_process / my.package.MainClass _The path `/data/local/tmp` is a good candidate to push the server, since it's readable and writable by `shell`, but not world-writable, so a malicious @@ -49,7 +84,7 @@ application may not replace the server just before the client executes it._ Instead of a raw _dex_ file, `app_process` accepts a _jar_ containing `classes.dex` (e.g. an [APK]). For simplicity, and to benefit from the gradle build system, the server is built to an (unsigned) APK (renamed to -`scrcpy-server`). +`scrcpy-server.jar`). [dex]: https://en.wikipedia.org/wiki/Dalvik_(software) [apk]: https://en.wikipedia.org/wiki/Android_application_package @@ -65,42 +100,77 @@ They can be called using reflection though. The communication with hidden components is provided by [_wrappers_ classes][wrappers] and [aidl]. [hidden]: https://stackoverflow.com/a/31908373/1987178 -[wrappers]: https://github.com/Genymobile/scrcpy/tree/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/server/src/main/java/com/genymobile/scrcpy/wrappers -[aidl]: https://github.com/Genymobile/scrcpy/tree/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/server/src/main/aidl/android/view +[wrappers]: https://github.com/Genymobile/scrcpy/tree/master/server/src/main/java/com/genymobile/scrcpy/wrappers +[aidl]: https://github.com/Genymobile/scrcpy/tree/master/server/src/main/aidl -### Threading -The server uses 3 threads: +### Execution - - the **main** thread, encoding and streaming the video to the client; - - the **controller** thread, listening for _control messages_ (typically, - keyboard and mouse events) from the client; - - the **receiver** thread (managed by the controller), sending _device messages_ - to the clients (currently, it is only used to send the device clipboard - content). +The server is started by the client basically by executing the following +commands: -Since the video encoding is typically hardware, there would be no benefit in -encoding and streaming in two different threads. +```bash +adb push scrcpy-server /data/local/tmp/scrcpy-server.jar +adb forward tcp:27183 localabstract:scrcpy +adb shell CLASSPATH=/data/local/tmp/scrcpy-server.jar app_process / com.genymobile.scrcpy.Server 2.1 +``` + +The first argument (`2.1` in the example) is the client scrcpy version. The +server fails if the client and the server do not have the exact same version. +The protocol between the client and the server may change from version to +version (see [protocol](#protocol) below), and there is no backward or forward +compatibility (there is no point to use different client and server versions). +This check allows to detect misconfiguration (running an older or newer server +by mistake). + +It is followed by any number of arguments, in the form of `key=value` pairs. +Their order is irrelevant. The possible keys and associated value types can be +found in the [server][server-options] and [client][client-options] code. + +[server-options]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/Options.java#L181 +[client-options]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/app/src/server.c#L226 + +For example, if we execute `scrcpy -m1920 --no-audio`, then the server +execution will look like this: + +```bash +# scid is a random number to identify different clients running on the same device +adb shell CLASSPATH=/data/local/tmp/scrcpy-server.jar app_process / com.genymobile.scrcpy.Server 2.1 scid=12345678 log_level=info audio=false max_size=1920 +``` + +### Components + +When executed, its [`main()`][main] method is executed (on the "main" thread). +It parses the arguments, establishes the connection with the client and starts +the other "components": + - the **video** streamer: it captures the video screen and send encoded video + packets on the _video_ socket (from the _video_ thread). + - the **audio** streamer: it uses several threads to capture raw packets, + submits them to encoding and retrieve encoded packets, which it sends on the + _audio_ socket. + - the **controller**: it receives _control messages_ (typically input events) + on the _control_ socket from one thread, and sends _device messages_ (e.g. to + transmit the device clipboard content to the client) on the same _control + socket_ from another thread. Thus, the _control_ socket is used in both + directions (contrary to the _video_ and _audio_ sockets). ### Screen video encoding The encoding is managed by [`ScreenEncoder`]. -The video is encoded using the [`MediaCodec`] API. The codec takes its input -from a [surface] associated to the display, and writes the resulting H.264 -stream to the provided output stream (the socket connected to the client). +The video is encoded using the [`MediaCodec`] API. The codec encodes the content +of a `Surface` associated to the display, and writes the encoding packets to the +client (on the _video_ socket). -[`ScreenEncoder`]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java +[`ScreenEncoder`]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java [`MediaCodec`]: https://developer.android.com/reference/android/media/MediaCodec.html -[surface]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java#L68-L69 -On device [rotation], the codec, surface and display are reinitialized, and a -new video stream is produced. +On device rotation (or folding), the encoding session is [reset] and restarted. -New frames are produced only when changes occur on the surface. This is good -because it avoids to send unnecessary frames, but there are drawbacks: +New frames are produced only when changes occur on the surface. This avoids to +send unnecessary frames, but by default there might be drawbacks: - it does not send any frame on start if the device screen does not change, - after fast motion changes, the last frame may have poor quality. @@ -108,11 +178,24 @@ because it avoids to send unnecessary frames, but there are drawbacks: Both problems are [solved][repeat] by the flag [`KEY_REPEAT_PREVIOUS_FRAME_AFTER`][repeat-flag]. +[reset]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java#L179 [rotation]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java#L90 -[repeat]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java#L147-L148 +[repeat]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java#L246-L247 [repeat-flag]: https://developer.android.com/reference/android/media/MediaFormat.html#KEY_REPEAT_PREVIOUS_FRAME_AFTER +### Audio encoding + +Similarly, the audio is [captured] using an [`AudioRecord`], and [encoded] using +the [`MediaCodec`] asynchronous API. + +More details are available on the [blog post][scrcpy2] introducing the audio feature. + +[captured]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/AudioCapture.java +[encoded]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/AudioEncoder.java +[`AudioRecord`]: https://developer.android.com/reference/android/media/AudioRecord + + ### Input events injection _Control messages_ are received from the client by the [`Controller`] (run in a @@ -124,13 +207,13 @@ separate thread). There are several types of input events: - other commands (e.g. to switch the screen on or to copy the clipboard). Some of them need to inject input events to the system. To do so, they use the -_hidden_ method [`InputManager.injectInputEvent`] (exposed by our +_hidden_ method [`InputManager.injectInputEvent()`] (exposed by the [`InputManager` wrapper][inject-wrapper]). -[`Controller`]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/server/src/main/java/com/genymobile/scrcpy/Controller.java#L81 +[`Controller`]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/Controller.java [`KeyEvent`]: https://developer.android.com/reference/android/view/KeyEvent.html [`MotionEvent`]: https://developer.android.com/reference/android/view/MotionEvent.html -[`InputManager.injectInputEvent`]: https://android.googlesource.com/platform/frameworks/base/+/oreo-release/core/java/android/hardware/input/InputManager.java#857 +[`InputManager.injectInputEvent()`]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/wrappers/InputManager.java#L34 [inject-wrapper]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/server/src/main/java/com/genymobile/scrcpy/wrappers/InputManager.java#L27 @@ -140,126 +223,222 @@ _hidden_ method [`InputManager.injectInputEvent`] (exposed by our The client relies on [SDL], which provides cross-platform API for UI, input events, threading, etc. -The video stream is decoded by [libav] (FFmpeg). +The video and audio streams are decoded by [FFmpeg]. [SDL]: https://www.libsdl.org -[libav]: https://www.libav.org/ +[ffmpeg]: https://ffmpeg.org/ + ### Initialization -On startup, in addition to _libav_ and _SDL_ initialization, the client must -push and start the server on the device, and open two sockets (one for the video -stream, one for control) so that they may communicate. +The client parses the command line arguments, then [runs one of two code +paths][run]: + - scrcpy in "normal" mode ([`scrcpy.c`]) + - scrcpy in [OTG mode](hid-otg.md) ([`scrcpy_otg.c`]) -Note that the client-server roles are expressed at the application level: +[run]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/app/src/main.c#L81-L82 +[`scrcpy.c`]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/app/src/scrcpy.c#L292-L293 +[`scrcpy_otg.c`]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/app/src/usb/scrcpy_otg.c#L51-L52 - - the server _serves_ video stream and handle requests from the client, - - the client _controls_ the device through the server. +In the remaining of this document, we assume that the "normal" mode is used +(read the code for the OTG mode). -However, the roles are reversed at the network level: - - - the client opens a server socket and listen on a port before starting the - server, - - the server connects to the client. - -This role inversion guarantees that the connection will not fail due to race -conditions, and avoids polling. - -_(Note that over TCP/IP, the roles are not reversed, due to a bug in `adb -reverse`. See commit [1038bad] and [issue #5].)_ - -Once the server is connected, it sends the device information (name and initial -screen dimensions). Thus, the client may init the window and renderer, before -the first frame is available. - -To minimize startup time, SDL initialization is performed while listening for -the connection from the server (see commit [90a46b4]). - -[1038bad]: https://github.com/Genymobile/scrcpy/commit/1038bad3850f18717a048a4d5c0f8110e54ee172 -[issue #5]: https://github.com/Genymobile/scrcpy/issues/5 -[90a46b4]: https://github.com/Genymobile/scrcpy/commit/90a46b4c45637d083e877020d85ade52a9a5fa8e +On startup, the client: + - opens the _video_, _audio_ and _control_ sockets; + - pushes and starts the server on the device; + - initializes its components (demuxers, decoders, recorder…). -### Threading +### Video and audio streams -The client uses 4 threads: - - - the **main** thread, executing the SDL event loop, - - the **stream** thread, receiving the video and used for decoding and - recording, - - the **controller** thread, sending _control messages_ to the server, - - the **receiver** thread (managed by the controller), receiving _device - messages_ from the server. - -In addition, another thread can be started if necessary to handle APK -installation or file push requests (via drag&drop on the main window) or to -print the framerate regularly in the console. - - - -### Stream - -The video [stream] is received from the socket (connected to the server on the -device) in a separate thread. - -If a [decoder] is present (i.e. `--no-display` is not set), then it uses _libav_ -to decode the H.264 stream from the socket, and notifies the main thread when a -new frame is available. - -There are two [frames][video_buffer] simultaneously in memory: - - the **decoding** frame, written by the decoder from the decoder thread, - - the **rendering** frame, rendered in a texture from the main thread. - -When a new decoded frame is available, the decoder _swaps_ the decoding and -rendering frame (with proper synchronization). Thus, it immediately starts -to decode a new frame while the main thread renders the last one. - -If a [recorder] is present (i.e. `--record` is enabled), then it muxes the raw -H.264 packet to the output video file. - -[stream]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/stream.h -[decoder]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/decoder.h -[video_buffer]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/video_buffer.h -[recorder]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/recorder.h +Depending on the arguments passed to `scrcpy`, several components may be used. +Here is an overview of the video and audio components: ``` - +----------+ +----------+ - ---> | decoder | ---> | screen | - +---------+ / +----------+ +----------+ - socket ---> | stream | ---- - +---------+ \ +----------+ - ---> | recorder | - +----------+ + V4L2 sink + / + decoder + / \ + VIDEO -------------> demuxer display + \ + recorder + / + AUDIO -------------> demuxer + \ + decoder --- audio player ``` +The _demuxer_ is responsible to extract video and audio packets (read some +header, split the video stream into packets at correct boundaries, etc.). + +The demuxed packets may be sent to a _decoder_ (one per stream, to produce +frames) and to a recorder (receiving both video and audio stream to record a +single file). The packets are encoded on the device (by `MediaCodec`), but when +recording, they are _muxed_ (asynchronously) into a container (MKV or MP4) on +the client side. + +Video frames are sent to the screen/display to be rendered in the scrcpy window. +They may also be sent to a [V4L2 sink](v4l2.md). + +Audio "frames" (an array of decoded samples) are sent to the audio player. + + ### Controller -The [controller] is responsible to send _control messages_ to the device. It +The _controller_ is responsible to send _control messages_ to the device. It runs in a separate thread, to avoid I/O on the main thread. -On SDL event, received on the main thread, the [input manager][inputmanager] -creates appropriate [_control messages_][controlmsg]. It is responsible to -convert SDL events to Android events (using [convert]). It pushes the _control -messages_ to a queue hold by the controller. On its own thread, the controller -takes messages from the queue, that it serializes and sends to the client. - -[controller]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/controller.h -[controlmsg]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/control_msg.h -[inputmanager]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/input_manager.h -[convert]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/convert.h +On SDL event, received on the main thread, the _input manager_ creates +appropriate _control messages_. It is responsible to convert SDL events to +Android events. It then pushes the _control messages_ to a queue hold by the +controller. On its own thread, the controller takes messages from the queue, +that it serializes and sends to the client. -### UI and event loop +## Protocol -Initialization, input events and rendering are all [managed][scrcpy] in the main -thread. +The protocol between the client and the server must be considered _internal_: it +may (and will) change at any time for any reason. Everything may change (the +number of sockets, the order in which the sockets must be opened, the data +format on the wire…) from version to version. A client must always be run with a +matching server version. -Events are handled in the [event loop], which either updates the [screen] or -delegates to the [input manager][inputmanager]. +This section documents the current protocol in scrcpy v2.1. -[scrcpy]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/scrcpy.c -[event loop]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/scrcpy.c#L201 -[screen]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/screen.h +### Connection + +Firstly, the client sets up an adb tunnel: + +```bash +# By default, a reverse redirection: the computer listens, the device connects +adb reverse localabstract:scrcpy_ tcp:27183 + +# As a fallback (or if --force-adb forward is set), a forward redirection: +# the device listens, the computer connects +adb forward tcp:27183 localabstract:scrcpy_ +``` + +(`` is a 31-bit random number, so that it does not fail when several +scrcpy instances start "at the same time" for the same device.) + +Then, up to 3 sockets are opened, in that order: + - a _video_ socket + - an _audio_ socket + - a _control_ socket + +Each one may be disabled (respectively by `--no-video`, `--no-audio` and +`--no-control`, directly or indirectly). For example, if `--no-audio` is set, +then the _video_ socket is opened first, then the _control_ socket. + +On the _first_ socket opened (whichever it is), if the tunnel is _forward_, then +a [dummy byte] is sent from the device to the client. This allows to detect a +connection error (the client connection does not fail as long as there is an adb +forward redirection, even if nothing is listening on the device side). + +Still on this _first_ socket, the device sends some [metadata][device meta] to +the client (currently only the device name, used as the window title, but there +might be other fields in the future). + +[dummy byte]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/DesktopConnection.java#L93 +[device meta]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/DesktopConnection.java#L151 + +You can read the [client][client-connection] and [server][server-connection] +code for more details. + +[client-connection]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/app/src/server.c#L465-L466 +[server-connection]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/DesktopConnection.java#L63 + +Then each socket is used for its intended purpose. + +### Video and audio + +On the _video_ and _audio_ sockets, the device first sends some [codec +metadata]: + - On the _video_ socket, 12 bytes: + - the codec id (`u32`) (H264, H265 or AV1) + - the initial video width (`u32`) + - the initial video height (`u32`) + - On the _audio_ socket, 4 bytes: + - the codec id (`u32`) (OPUS, AAC or RAW) + +[codec metadata]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/Streamer.java#L33-L51 + +Then each packet produced by `MediaCodec` is sent, prefixed by a 12-byte [frame +header]: + - config packet flag (`u1`) + - key frame flag (`u1`) + - PTS (`u62`) + - packet size (`u32`) + +Here is a schema describing the frame header: + +``` + [. . . . . . . .|. . . .]. . . . . . . . . . . . . . . ... + <-------------> <-----> <-----------------------------... + PTS packet raw packet + size + <---------------------> + frame header + +The most significant bits of the PTS are used for packet flags: + + byte 7 byte 6 byte 5 byte 4 byte 3 byte 2 byte 1 byte 0 + CK...... ........ ........ ........ ........ ........ ........ ........ + ^^<-------------------------------------------------------------------> + || PTS + | `- key frame + `-- config packet +``` + +[frame header]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/Streamer.java#L83 + + +### Controls + +Controls messages are sent via a custom binary protocol. + +The only documentation for this protocol is the set of unit tests on both sides: + - `ControlMessage` (from client to device): [serialization](https://github.com/Genymobile/scrcpy/blob/master/app/tests/test_control_msg_serialize.c) | [deserialization](https://github.com/Genymobile/scrcpy/blob/master/server/src/test/java/com/genymobile/scrcpy/ControlMessageReaderTest.java) + - `DeviceMessage` (from device to client) [serialization](https://github.com/Genymobile/scrcpy/blob/master/server/src/test/java/com/genymobile/scrcpy/DeviceMessageWriterTest.java) | [deserialization](https://github.com/Genymobile/scrcpy/blob/master/app/tests/test_device_msg_deserialize.c) + + +## Standalone server + +Although the server is designed to work for the scrcpy client, it can be used +with any client which uses the same protocol. + +For simplicity, some [server-specific options] have been added to produce raw +streams easily: + - `send_device_meta=false`: disable the device metata (in practice, the device + name) sent on the _first_ socket + - `send_frame_meta=false`: disable the 12-byte header for each packet + - `send_dummy_byte`: disable the dummy byte sent on forward connections + - `send_codec_meta`: disable the codec information (and initial device size for + video) + - `raw_stream`: disable all the above + +[server-specific options]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/Options.java#L309-L329 + +Concretely, here is how to expose a raw H.264 stream on a TCP socket: + +```bash +adb push scrcpy-server-v2.1 /data/local/tmp/scrcpy-server-manual.jar +adb forward tcp:1234 localabstract:scrcpy +adb shell CLASSPATH=/data/local/tmp/scrcpy-server-manual.jar \ + app_process / com.genymobile.scrcpy.Server 2.1 \ + tunnel_forward=true audio=false control=false cleanup=false \ + raw_stream=true max_size=1920 +``` + +As soon as a client connects over TCP on port 1234, the device will start +streaming the video. For example, VLC can play the video (although you will +experience a very high latency, more details [here][vlc-0latency]): + +``` +vlc -Idummy --demux=h264 --network-caching=0 tcp://localhost:1234 +``` + +[vlc-0latency]: https://code.videolan.org/rom1v/vlc/-/merge_requests/20 ## Hack